• The boarding step allows for easier mounting and dismounting of a zero-turn mower.
• A complete bolt-on solution, this kit attaches to the left side of the mower frame for convenient access.

• 48-inch (122-cm) floating mower deck
• Smooth-running, 14.5 hp (10.8 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

Stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds. 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance. Optional MulchControl⌖ attachment provides superior mulching performance and versatility. Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance. Mower deck is suspended from the vehicle for a smooth and level cut. Adjustable mower wheels, positioned just above ground level, help reduce scalping. (Setup Included)

• All-welded frame

³⁶

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• AutoConnect™ deck compatible for deck attach/detach in seconds
• Cab or Open Station configuration available
• PowrReverser™ or E-hydro transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

• Reversible cutting edge
• Heavy duty welded steel end plates
• Quick-attach capability

³⁶

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

• Pull-type unit with drawbar
• Adjustable discharge chute
• Reversible, hydraulic feed roll

³⁶

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

Setup Included.

The padded armrest kit is only compatible with Z700R and Z900 E, M,and R machines.  Not compatible with Z997R Diesel model.

17 cu. ft. (heaped) capacity, 1,000 lb. load limit. Heavy duty reinforced structural frame to handle heavy loads, high speed and off-road terrain. Features double-sealed, high speed roller bearings. Positive lock system to prevents unintentional unlatching during intense use. Heavy duty polyethylene bed accepts dividers that can be made with the included template. (Setup Included)

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Adjustable tines
• Steel tines and waffle plates Angled tine beam
• iMatch^TM compatible
  

³⁶