The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 5’6″ blade widths are perfect for sidewalks. High-strength components ensure commercial durability. Blade up and down is controlled by the vehicle winch.

• 5'6" Wide  x 19.7" Tall Straight Blade
• Five position manual angling and winch lift
• Quick Attach System with Full Blade Trip Protection
• Includes:  Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• XUV560 & XUV590 (2016 - 2020)

²⁰

• Adjustable discharge outlet
• Cat. 1 iMatch^TM and Cat. 2 Quick Hitch compatible

³⁶

• Heavy-duty paddle beater
• Poly-bonded floor
• Field-installed top beater kits
• Hydraulic conversion kits

³⁶

• AutoConnect™ deck compatible for deck attach/detach in seconds
• Cab or Open Station configuration available
• PowrReverser™ or E-hydro transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

• Corrosion-resistant, powder-coat paint increases durability
• Replaceable shares, shins, and landslides extend life

³⁶

• Rugged, tubular frame enhances durability
• Quick, easy attachment
• Replaceable spears
• See brochure for loader series compatibility

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• Fixed back plate for added rigidity
• Cutting edge is strategically positioned
• Fixed tailgate helps in rough situations
• Scarifier has three depth adjustments

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Mid-upper and mid-lower tine sections welded in and are standard base equipment
• Easily attaches to Quick-Change loader carrier
• 1200 lb. lift capacity

³⁶

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 250 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 2.5 Cu. Ft. Capacity (up to 200 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• HPX615 & HPX815
• XUV835 & XUV865 E,M,R
• XUV560 & XUV590
• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

For Model Year 2016- Select Series Tractors (X330, X350, X354, X370, X380, X384, X390, X394, X350R, and X570 with manual lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• 18-in. cut and sewn seat
• 4 year/300 hour bumper-to-bumper warranty

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

Composed of strong tubular steel, the heavy-duty bumper and brush guard protect the unit from front impacts, as well as add increased protection to the grille and headlights. Compatible with TS 4x2, TX 4x2, TH 6X4 Gas and TH 6X4 Diesel.

Setup Included.

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional skid shoes
  

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible
  

³⁶

• 24 hp* (17.9 kW) V-Twin engine
• 54-in (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty**

For X300 Select Series mowers with 42-in. Accel Deep mower deck. Hopper design provides modern styling, improved bagging performance, cleaner operation and easy-to-empty bags. Includes 7-Bushel Hopper Assembly and Rear Bagger Chute, BUC11244. (Setup Included)

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Achieve results just like the professionals.
• The attachment works extremely well with the suspended mower design.
• The attachments are easy to adjust for varying mower cutting height.
• The brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf.
• The brush fits the ZTrak 42-in. (107-cm) mower deck.
• The brush is very economical and functional.

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• Standard four-wheel drive (4WD) for maximum traction
• Tightest turning radius in its horsepower class
• Hydro transmission with Twin Touch™ pedals for ease of use

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/500 hour bumper-to-bumper warranty

• Strong frame for added durability
• Quick and easy attachment
• Serrated edge for secure movement
• Strong hinges for increased life
• See brochure for loader series compatibility

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Discharge chute deflection
• Field-installed drift cutters kits
• Discharge chute rotation as base equipment
• Torque-controlled impeller moves snow easily

³⁶

• 52-in. (132-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Storage stands
• 21-in. (533-mm) diameter polypropylene brush
• Gearbox with 3:1 reduction
• Heavy-duty no. 50 chain drive
• Two adjustable rear-mounted caster wheels
• Brush head height adjustment
• Three spare driveshaft shear bolts mounted to shell
• Compact tractors require dual selective control valve and front attaching support kit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• Hauls 17 bu. of material.
• Premium features include: adjustable hitch and large 12 in. x 3 in. wheels.
• Collapsible for storage.

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Reversible cutting edge
• Heavy duty welded steel end plates
• Quick-attach capability

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

RS Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• self-clearing cuts
• stump-grinding with optional carbide teeth

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Edge™ Rear-discharge Deck
• Large capacity rear hopper easily emptied from operator seat
• 4 year/300 hour bumper-to-bumper warranty

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

GS-Series Scrap Grapples are designed for:

• scrap handling
• recycling center
• disaster cleanup
• jobsite cleanup applications
  

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• All-welded frame

³⁶

• 24 hp (17.9 kW)^* V-Twin Extended Life Series (ELS) Engine
• 54-in. Edge™ Mower Deck
• Easy Change™ 30-Second Oil Change System
• Adjustable lumbar seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction. (Setup Included)

• Capacity to handle big snow removal jobs.
• Works well in all snow conditions.
• Ideal in all snow regions.
• Rear weights and tire chains are recommended for additional traction.

Setup Included.