• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

The jack kit assists with service of the machine. There are holes pre-drilled in the cross member for ease of installation.

Setup Included.

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

Compatible with 100, 200, X300, X500, and X700 Series. The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include: Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants; 800-lb (363-kg) capacity makes it durable enough for the heavy jobs; 350 lb (158 kg) when using swivel feature to dump; Convenient foot pedal release for easy dumping; Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump (Setup Included)

• 24 hp (17.9 kW)^* V-Twin Extended Life Series (ELS) Engine
• 48-in. Edge™ Mower Deck
• Easy Change™ 30-Second Oil Change System
• Adjustable lumbar seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• 54-in. (137-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• 3-year/200-hour bumper-to-bumper warranty^**

Compatible with E100, X300, X500, and X700 models. Unique bracketless tailgate means no side channels to obstruct materials when emptying. When shoveling, recessed plate bolt heads stay out of the way. 1-Piece solid undercarriage. Contoured corner bed design; 1,000 lb. load limit. (Setup Included)

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel™ Deep Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/300 hour bumper-to-bumper warranty

• 25 hp* (18.6 kW) EFI engine with Electronic Throttle Control
• 48-in (122 cm), 54-in. (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty**

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶