• 24 hp^* (17.9 kW) V-Twin engine
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty^**

• Finger joint drive system
• Hydraulic tine pitch control
• Hydraulic fold for easy transport
• Hands-free locking transport wheels

³⁶

• Field-installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubbert insert conversion kit keeps discharge from clogging

³⁶

Snow Blades are designed for:

• snow removal
• light dirt work

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• 25.5-hp (19 kW) iTorque™ Power System
• Power four-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Standard LED headlights and fender lights
• Comfortable, marine-grade seat stays in top condition
• Larger, heavier frame for added stability
• Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

Compatible with Mid Z 9 and 7 Series, Mid Z 994R, and ZTrak Z500 (E, M, R) with ROPS. Not compatible with 997R. Made of tough acrylic coated polyester. The lightweight, durable aluminum frame clamps to roll bar without drilling. Folds easily for removal.

Setup Included.

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• 18-in. cut and sewn seat
• 4 year/300 hour bumper-to-bumper warranty

• Quick and easy connection

³⁶

• Hitch compatible with iMatch™
• Corrosion-resistant, powder-coat paint increases durability
• Replaceable and adjustable tines

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

• Fixed back plate for added rigidity
• Cutting edge is strategically positioned
• Fixed tailgate helps in rough situations
• Scarifier has three depth adjustments

³⁶

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Naturally aspirated diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

• AutoConnect™ deck compatible for deck attach/detach in seconds
• Cab or Open Station configuration available
• Standard hydrostatic transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

• Mow up to 2 acres
• 23 HP^* (17 kW) V-Twin engine
• 20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch
• 3-year/200-hour bumper-to-bumper warranty^**

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Mid-upper and mid-lower tine sections welded in and are standard base equipment
• Easily attaches to Quick-Change loader carrier
• 1200 lb. lift capacity

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

• Ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• 14-in. discharge auger
• Durable chain for light-duty jobs
• iMatch^TMcompatible

³⁶

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Capacity to handle big snow removal jobs.
• Works well in all snow conditions.
• Ideal in all snow regions.
• Rear weights and tire chains are recommended for additional traction.

Setup Included.

• 24 hp^* (17.9 kW) V-Twin engine
• 54-in (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty^**

³⁶

Based on the material your operation most commonly uses for de-icing, the WESTERN® MARAUDER™ line offers the best material delivery system for you. The S035A and S035C are purpose-built for mid-duty UTVs and compact trucks.

• 0.35 Cu. Yd. Capacity (up to 750 Lbs. of material)
• Corrosion Resistant Stainless Steel Tub
• Auger drive material delivery system - Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)
• T-Series: TH Gas, TH Diesel

²⁰

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

³⁶

• Compression springs
• Cutting teeth for superior soil preparation
• iMatch™ compatible
• Steel roller studded with spikes
  

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

Snow Blades are designed for:

• snow removal
• light dirt work

• 7 tines at 1.25 In. diameter solid round steel
• Multiple working widths to match tractor requirements
• Increased uptime with quick-change capability 

³⁶

When winter won’t wait, the WESTERN® LOW-PRO 300W wireless electric tailgate spreader quickly mounts onto pickup trucks, SUVs, utility vehicles, and tractors without drilling or wiring. Standard with a completely wireless key fob control, 2″ receiver hitch, and a 7-pin plug, this is THE ultimate in plug ‘n’ play convenience for salt spreaders.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Wireless on/off control

Compatible with:

• XUV560 & XUV590 (2016 - current)

²⁰

For Select Series mowers with 54-in. Accel Deep mower decks. Hopper design provides modern styling, improved bagging performance, cleaner operation, and easy-to-empty bags. Blower fan and housing provide smooth grass flow even in wet and heavy grass. Price includes BUC11233 7-bu (247-L) 2-Bag Hopper Assembly (X300/X500 M-T), BM21681 Power Flow Chute (6.5/7bu), and BG20749 54A High-Performance Power Flow blower (X300/X500 M-T).

(Setup Included)

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• 47-in. (119-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit.
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

For X300 Select Series mowers with 42-in. Accel Deep mower deck. Hopper design provides modern styling, improved bagging performance, cleaner operation and easy-to-empty bags. Includes 7-Bushel Hopper Assembly and Rear Bagger Chute, BUC11244. (Setup Included)

• 22 hp (16.4 kW)^* V-Twin Engine
• 42-in. Edge™ Mower Deck
• Hydrostatic Transmission w/side-by-side pedals
• Easy Change™ 30-Second Oil Change System
• 15-in Open-Back seat
• Easy to read fuel gauge
• 2 year/120 hour bumper-to-bumper warranty

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

The foot pegs are standard on R Series machines. These two-position foot pegs provide different foot placement options during operation.

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• All-welded frame

³⁶

• Mow up to 2 acres
• 23 HP^* (17 kW) V-Twin engine
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• LED lights, floor mat, front bumper, rear hitch, covered storage come standard
• 3-year/200-hour bumper-to-bumper warranty^**

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

17 cu. ft. (heaped) capacity, 1,000 lb. load limit. Heavy duty reinforced structural frame to handle heavy loads, high speed and off-road terrain. Features double-sealed, high speed roller bearings. Positive lock system to prevents unintentional unlatching during intense use. Heavy duty polyethylene bed accepts dividers that can be made with the included template. (Setup Included)

• Heavy-duty wear shields for added gear case protection
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth
• Category 2 quick hitch compatible

³⁶

• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

• 24 hp* (17.9 kW) V-Twin engine
• 48-in (122 cm), 54-in (137cm) and 60-in (152 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty**

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

Compatible with 100, 200, X300, X500, and X700 Series. Haul a variety of materials. Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together. Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart. The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.1,000 lb. (454 kg) load limit. (Setup Included)

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• Standard LED headlights and fender lights
• Comfortable, marine-grade seat stays in top condition
• Larger, heavier frame for added stability
• Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• 21-in. cut and sewn Seat
• 4 year/500 hour bumper-to-bumper warranty

• Adjustable discharge outlet
• Cat. 1 iMatch^TM and Cat. 2 Quick Hitch compatible

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

GS-Series Scrap Grapples are designed for:

• scrap handling
• recycling center
• disaster cleanup
• jobsite cleanup applications
  

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

Stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds. 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance. Optional MulchControl⌖ attachment provides superior mulching performance and versatility. Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance. Mower deck is suspended from the vehicle for a smooth and level cut. Adjustable mower wheels, positioned just above ground level, help reduce scalping. (Setup Included)

• Mow up to 2 acres
• 20 HP^* (14.9 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• Maximum forward speed 7 mph (11.2 km/h) with 3-gal. (13.6-litre) fuel tank
• 3-year/200-hour bumper-to-bumper warranty^**

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

³⁶

• Digidrive^TM drive system ensures maximum life
• Hydraulic working angle adjustment
• Durable Steel tines
• Balloon tires operates smoothly on bumpy ground

³⁶

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 5’6″ blade widths are perfect for sidewalks. High-strength components ensure commercial durability. Blade up and down is controlled by the vehicle winch.

• 5'6" Wide x 19.7" Tall Straight Blade
• Five position manual angling and winch lift
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• XUV560 & XUV590 (2020 - current)

²⁰

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• 25.5-hp (19.0 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
• Electronic throttle control and power two-wheel steer
• 4 year/500 hour bumper-to-bumper warranty

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶