• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit.  NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. (Setup Included)

³⁶

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• XUV560 & XUV590 (2016 - current)

²⁰

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible
  

³⁶

• 47-in. (119-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit.
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.

• Modular Design
• Roll-Over Protective Structure (ROPS) Certified
• Steel Doors
• Sliding Glass Windows
• Front windshield wiper
• Safety Glass Rear Window

• AutoConnect™ deck compatible for deck attach/detach in seconds
• Cab or Open Station configuration available
• Standard hydrostatic transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

• 27-hp (20.1-kW)
• 54” and 60” 7Iron™ PRO decks
• Mow up to 12 mph
• Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation^**

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

For X300 Select Series mowers with 42-in. Accel Deep mower deck. Hopper design provides modern styling, improved bagging performance, cleaner operation and easy-to-empty bags. Includes 7-Bushel Hopper Assembly and Rear Bagger Chute, BUC11244. (Setup Included)

• Mow up to 2 acres
• 20 HP^* (14.9 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• Maximum forward speed 7 mph (11.2 km/h) with 3-gal. (13.6-litre) fuel tank
• 3-year/200-hour bumper-to-bumper warranty^**

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• 36-inch (91-cm) floating mower deck
• Smooth-running, 14.5 hp (10.8 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

Base unit includes:

• 54-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 25.5-hp ^‡ (19-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse pedals
• 4 year/300 hour bumper-to-bumper warranty

• Premium HVAC cab with light-stone interior
• Cargo box power lift
• LED headlights
• Up to 4,000-lb towing capacity

• Heavy-duty grapples
• Quick, easy attachment

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

GS-Series Scrap Grapples are designed for:

• scrap handling
• recycling center
• disaster cleanup
• jobsite cleanup applications
  

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hardwired
• Electric feedgate

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

The WESTERN® Tornado™ UTV 11 cu ft poly hopper spreader is built just for UTVs. It features a sturdy, compact design that delivers many features of the larger models, in a size just right for your utility vehicle.

• 0.4 Cu. Yd. Capacity (up to 880 Lbs. of material)
• Corrosion Resistant Poly Tub with Fitted Tarp Cover
• Auger drive material delivery system
• Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• 61-inch (155-cm) floating mower deck
• Powerful 23.5 hp (17.5 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

• Large, 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Hand lever releases 180-degree dump angle for complete emptying - Empties all material, Makes cleanup of the cart easier

(Setup Included)

• 20-bushel collection hopper
• Electronic dump-from-seat function is standard
• Available with optional locking casters
• Boot attaches to compatible mower deck without using tools
• iMatch™ compatible

³⁶

• 24 hp* (17.9 kW) V-Twin engine
• 48-in (122 cm), 54-in (137cm) and 60-in (152 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty**

• 24 hp (17.9 kW)^* V-Twin Extended Life Series (ELS) Engine
• 48-in. Edge™ Mower Deck
• Easy Change™ 30-Second Oil Change System
• Adjustable lumbar seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

The trash receptacle kit includes the mounting bracket, picker, and bucket.

Setup Included.

Stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds. 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance. Optional MulchControl⌖ attachment provides superior mulching performance and versatility. Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance. Mower deck is suspended from the vehicle for a smooth and level cut. Adjustable mower wheels, positioned just above ground level, help reduce scalping. (Setup Included)

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• Multi-passenger capability for four people
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement
• Comprehensive dash display with speed indicator

Angle Brooms feature:

• standard hydraulic-angling range of 30 degrees to right or left
• 32-inch diameter brush with standard 50/50 poly-wire segments
• optional all-polypropylene brush segments are also available.
  

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• Adjustable discharge outlet
• Cat. 1 iMatch^TM and Cat. 2 Quick Hitch compatible

³⁶