Large 1,000 lb. capacity, 17 cu. ft. load limit. Heavy-duty poly bed won't dent or rust. 16" x 6.50" pneumatic 4 ply turf tread tires for maximum traction. Quick-release dumping action with steep angle for complete emptying. (Setup Included)

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction. (Setup Included)

• Excellent for pushing snow or other loose material.
• Blade surface is curved to roll than push material, which requires less power and increases blade capacity.
• Requires two UC13263 suit case weights and one BG20627 rear weight bracket. Tire chains are recommended for additional traction.

Setup Included.

• Finger joint drive system
• Hydraulic tine pitch control
• Hydraulic fold for easy transport
• Hands-free locking transport wheels

³⁶

• Fixed position
• Handle brush and turf grass
• Sharp knives reduce material size 
• Leaves finished look

³⁶

Snow Blades are designed for:

• snow removal
• light dirt work

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying. (Setup Included)

• Heavy-duty wear shields for added gear case protection
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth
• Category 2 quick hitch compatible

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

Compatible with 100, 200, X300, X500, and X700 Series. Haul a variety of materials. Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together. Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart. The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.1,000 lb. (454 kg) load limit. (Setup Included)

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Double-wing cutting blade
• iMatch^TM compatible 
  
• Corrosion-resistant, powder-coat paint increases durability

³⁶

• 23-hp (17.2 kW)^* FR series engine
• 48-, 54-, or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

The foot pegs are standard on R Series machines. These two-position foot pegs provide different foot placement options during operation.

Compatible with Z300 ZTrak Mowers. Custom metal frame attaches to engine guard for a secure fit. Protects operator from the sun’s rays. Tough woven polyester construction for strength and durability.

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Adjustable height clevis hitch
• Hydraulic lift 3-point hitch
• Ribbed tires for smooth ride

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch
• 3-year/200-hour bumper-to-bumper warranty^**

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

The trash receptacle kit includes the mounting bracket, picker, and bucket.

Setup Included.

• Rugged, tubular frame enhances durability
• Quick, easy attachment
• Replaceable spears
• See brochure for loader series compatibility

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

17 cu. ft. (heaped) capacity, 1,000 lb. load limit. Heavy duty reinforced structural frame to handle heavy loads, high speed and off-road terrain. Features double-sealed, high speed roller bearings. Positive lock system to prevents unintentional unlatching during intense use. Heavy duty polyethylene bed accepts dividers that can be made with the included template. (Setup Included)

• 7-Iron™ PRO Mowing Deck
• Mulch On Demand™ Available
• Gasoline Engine

• Powerful Final Tier 4-compliant diesel engine
• AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

Base unit includes:

• 60-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 27-hp ^‡ (20.1-kW) gasoline engine
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seats available for additional cost
• 3-year or 1200-hour warranty, whichever comes first; first 24 months, no hour limitation

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Quick and Easy Connection
• Heavy-Duty Design to Tackle Tough Jobs
• Stability for Easy Compact Storage
• Hydraulics Mounted for Improved Protection

³⁶

• 25-hp (18.6 kW)^*, 810 cc engine
• 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Hitch compatible with iMatch™
• Corrosion-resistant, powder-coat paint increases durability
• Replaceable and adjustable tines

³⁶

• 22 hp (16.4 kW)^* V-Twin Engine
• 48-in. Edge™ Mower Deck
• Electric PTO, Hydrostatic Transmission w/side-by-side pedals
• Operator station is wide and comfortable
• 15-in Open-Back seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

• Diesel engine and smooth power steering
• Multi-passenger capability for four people
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement

• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

• 48-inch (122-cm) floating mower deck
• Powerful 19 hp (14.2 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

When winter won’t wait, the WESTERN® LOW-PRO 300W wireless electric tailgate spreader quickly mounts onto pickup trucks, SUVs, utility vehicles, and tractors without drilling or wiring. Standard with a completely wireless key fob control, 2″ receiver hitch, and a 7-pin plug, this is THE ultimate in plug ‘n’ play convenience for salt spreaders.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Wireless on/off control

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• 5 - 9 ft. (1.5 - 2.8 m) cutting widths
• Single- or dual-belt drive with automatic belt idler
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Reversible cutting edge
• Welded skid shoes
• Rubber blade edges

³⁶

• Requires third hydraulic loader function
• Click pin and pivot pin replacement for ease of assembling and disassembling
• Tooth pattern designed for gripping, not piercing

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• All-welded frame

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

³⁶

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

• Easy to install
• Increases productivity of WH and WHP Series Hydrostatic Walk-Behind Mowers
• Pneumatic tires for a soft ride
• Large operator platform

Setup Included.

• Quick, easy connection
• Rugged, tubular frame
• Replaceable spears for extended implement life

³⁶

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• 22-hp (16.4-kW)^* Cyclonic engine
• 42-in. (107-cm) Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/300 hour bumper-to-bumper warranty

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability
• See brochure for loader series compatibility

³⁶

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• Heavy-duty paddle beater assemblies
• Poly-bonded floor
• Fine-spread rear pan available

³⁶

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• 1524 mm (60 in.) Clearing Width Straight
• 1358 mm (53.5 in.) Clearing Width Fully Angled
• Replaceable Cutting Edge
• Heavy 7-Gauge, Curved Blade Angled Left or Right Up to 27 degrees
• Two Adjustable Heavy Duty Skid Shoes
• Reinforced Angle Bar on Back of Blade Spring Breakaway with Lock-Out Pin
• Compact tractors require dual selective control valve and front attaching support lit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• 19 hp (14.2 kW)^* Engine
• 42-in. Edge™ Mower Deck
• Spring-assisted hand grip lever raises and lowers deck easily
• Operator station is wide and comfortable
• 15-in. Open-Back seat
• 2 year/120 hour bumper-to-bumper warranty

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• Fixed back plate for added rigidity
• Cutting edge is strategically positioned
• Fixed tailgate helps in rough situations
• Scarifier has three depth adjustments

³⁶

The WESTERN® Tornado™ UTV 11 cu ft poly hopper spreader is built just for UTVs. It features a sturdy, compact design that delivers many features of the larger models, in a size just right for your utility vehicle.

• 0.4 Cu. Yd. Capacity (up to 880 Lbs. of material)
• Corrosion Resistant Poly Tub with Fitted Tarp Cover
• Auger drive material delivery system
• Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• Quick and easy connection

³⁶

• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

• Durable cutting edge
• Adjustable skid shoes
• Hydraulic chute deflector
• Field-installed cutting edge kits

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

• Modular Design
• Roll-Over Protective Structure (ROPS) Certified
• Steel Doors
• Sliding Glass Windows
• Front windshield wiper
• Safety Glass Rear Window