Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1004 - Mounting Adapter Kit, 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1005 - Mounting Adapter Kit, 310L/EL Backhoe. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1006 - Mounting Adapter Kit, 310SL/HL, 410L Backhoe. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1007 - Mounting Adapter Kit, 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1010 - Mounting Adapter Kit, 75 and 85 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1011 - Mounting Adapter Kit, 130 and 135 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

Snow Blades are designed for:

• snow removal
• light dirt work

High torque stump shredder

• Remove stumps from 8 to 28 inches in diameter in a single pass.
• Low-speed, high-torque auger planetary drive shreds material more safely and without the dangerous flying debris of conventional stump grinders.
• This stump shredder is optimized to work with John Deere skid steer loaders (SSLs) and compact track loaders (CTLs). It’s also compatible with most competitive models.

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3000 - 14-22 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3001 - 14-22 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3002 - 14-22 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1001 - MOUNTING KIT, 35, PIN-ON ADAPTER
Option #1002 - MOUNTING KIT, 35, WEDGE ADAPTER

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1003 - MOUNTING KIT, 50/60, PIN-ON ADAPTER
Option #1004 - MOUNTING KIT, 50/60, WEDGE ADAPTER

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3030 - 27-35 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3031 - 27-35 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3032 - 36-44 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3033 - 36-44 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

For 1023E and 1025R tractors built after June 2020; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

• 22-hp (16.4-kW)^* Cyclonic engine
• 48-in. Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• 23-hp (17.2 kW)^* FR series engine
• 48-, 54-, or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

• Gross Power: 51.7 kW (69 hp)
• Net Power: 49.4 kW (66 hp)
• Rated Operating Capacity: 994 kg (2,190 lb.)
• Operating Weight: 3246 kg (7,150 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• 27-hp (20.1-kW)
• 54” and 60” 7Iron™ PRO decks
• Mow up to 10 mph
• Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation^**

• 24 hp (17.9 kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/500 hour bumper-to-bumper warranty

Mulching Heads are built to

• remove up to 8-inch trees and 12-inch stumps.
• shred underbrush and woody materials into beneficial mulch in minutes
• 60-inch high-capacity, smooth rotor design reduces material drag and horsepower requirements.

Option #2000 - Mulching Head Smooth Rotor: Used for ground engagement of 1-2". The smooth drum creates less of a HP draw when mixing wood material into the top layer of the dirt. Spiral design also makes it so that fewer tools are engaging the wood material at any given time. Comes equipped with 30 carbide tipped tools as standard equipment. Optional single-edge knife tools available.
Option #2001 - Mulching Head DCR Rotor: Ideal when you need to process material into a fine end product. The depth control rings provide a smaller bite to create a fast cut with less horsepoer draw. The DCR is not recommended for sandy and rocky environments or a job where you may engage the ground; this can cause faster wear. Comes equipped with 24 double-edge knife tools as standard equipment.

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1001 - MOUNTING KIT, 35, PIN-ON ADAPTER
Option #1002 - MOUNTING KIT, 35, WEDGE ADAPTER

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

Rollout buckets feature:

• an open design that enables quick, clean, and easy material loading.
• three sizes for achieving elevated dump heights in high-capacity applications, including construction, forestry, agriculture, demolition, recycling, and land management.
• standard universal bolt-on cutting edge that is double beveled and reversible, for extended wear life.

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 mm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• Assembled in Wisconsin
• 4 year/500 bumper-to-bumper warranty

• 25-hp (18.6 kW)^*, 810 cc engine
• 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

Bale Spears are

• built for a long working life and designed for the loading, carrying, and stacking.
• designed to provide visibility to the bale spear and tine tips.
• replaceable and come in three different configurations of single, dual, or triple to help match numerous bale-handling applications.

• Forged-steel bale spear tines
• Hitch provides a super-quick connection
• Tubular frame is built strong 

³⁶

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. 

• 23.5-hp (17.5-kW)
• 48”, 54”, and 60” 7Iron™ PRO decks
• Mow up to 10 mph
• Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation^**

Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

Option #1006 - 42" TINES RATED 4000 LBS
Option #1008 - 48" TINES RATED 4000 LBS
Option #1007 - 42" TINES RATED 5500 LBS
Option #1009 - 48" TINES RATED 5500 LBS
Option #1010 - 48" TINES RATED 6200 LBS

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1003 - MOUNTING KIT, 75/85, PIN-ON
Option #1004 - MOUNTING KIT, 75/85, PIN-ON BHL STYLE COUPLER