• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

• Standard LED headlights and fender lights
• Comfortable, marine-grade seat stays in top condition
• Larger, heavier frame for added stability
• Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

For pricing and additional discounts, see your local John Deere Dealer.

For 1023E and 1025R tractors built after June 2020; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

• 19 hp (14.2 kW)^* Engine
• 42-in. (107-cm) Edge™ Mower Deck
• Hydrostatic transmission with side-by-side pedals
• Assembled in Tennessee

For 2032R and 2038R OOS tractors 2017 and newer; Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness, actuator, rotary dial and raise/lower lever. System must be calibrated after installation to insure accurate cut-heights. Refer to installation instructions for calibration procedure or refer to ServiceADVISOR.

• Adjustable Chute Deflector
• 245° Chute Rotation (Manual or Hydraulic)
• Adjustable and Replaceable Steel Skid Shoes
• iMatch™/Quick Hitch compatible

³⁶

Base unit includes:

• 24.7 hp (18.4 kW) liquid-cooled diesel engine
• 11.5 U.S. gallon fuel tank (43.5 L)
• 54-in. (137-cm) 7-Iron PRO Side-Discharge Deck included; other deck options available for additional cost
• Fully Adjustable Suspension Seat with Armrests; another seat option available  
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch
• 3-year/200-hour bumper-to-bumper warranty^**
• Assembled in Tennessee

• Built by John Deere in Greeneville, Tennessee: Features a comfortable, 20-in. back, two-spring suspension seat with armrests and ComfortGlide™, cup holder, side and under-seat storage compartments, color-coded controls for easy identification, low-fuel warning light, foldable Roll-Gard rollover protective structure (ROPS), and retractable seat belt
• Rubber floor mats, foot lift, and premium handlebars come standard on this model
• 24-hp ^‡ (17.9-kW), John Deere branded Kawasaki V-Twin engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions – most suitable for a flat terrain with obstacles, up to two acres 
• Mow well fast with the 48-in. (122-cm) triple blade Accel Deep™ Mower Deck, engineered to process tall grass at faster speeds
• Dual Hydrostatic Tuff Torq® transmission with 1-in. axles for power and durability, maximum speed 8-mph - steer using motion-control levers, effective over long, level tracks of land or around trees, shrubs and flower beds
• Hassle-Free Ownership: John Deere 4-year/300-hour bumper-to-bumper warranty, local John Deere dealer support and a 10-Point Pre-Delivery Inspection prior to sale

• Durable cutting edge
• Adjustable skid shoes
• Hydraulic chute deflector
• Field-installed cutting edge kits

³⁶

• Mow up to 2 acres
• 23 HP^* (17 kW) V-Twin engine
• 20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch
• 3-year/200-hour bumper-to-bumper warranty^**
• Assembled in Tennessee

• All-welded frame

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

7-Iron™ PRO Mowing Deck

Gasoline Engine

Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

Option #1006 - 42" TINES RATED 4000 LBS
Option #1008 - 48" TINES RATED 4000 LBS
Option #1007 - 42" TINES RATED 5500 LBS
Option #1009 - 48" TINES RATED 5500 LBS
Option #1010 - 48" TINES RATED 6200 LBS

• Powerful diesel engine and ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements
• Assembled in Georgia

For pricing and additional discounts, see your local John Deere Dealer.

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• 21.5-hp (16 kW)^* V-Twin Engine
• Choice of 42- or 48-in. (107- or 122-cm) Accel Deep™ Mower Decks, compatible with optional MulchControl™ kit
• Electric PTO, heavy-duty hydrostatic transmission with side-by-side pedals
• Assembled in Tennessee

• 27-hp (20.1-kW)
• 54” and 60” 7Iron™ PRO decks
• Mow up to 12 mph
• Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation^**

For 2025R tractors 2017 and newer; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages

For X300 Select Series mowers with 42-in. Accel Deep mower deck. Hopper design provides modern styling, improved bagging performance, cleaner operation and easy-to-empty bags. Includes 7-Bushel Hopper Assembly and Rear Bagger Chute, BUC11244.

• Efficient drive system
• Double-sided knives
• iMatch^TMcompatible

³⁶

• Pull-type unit with drawbar
• Adjustable discharge chute
• Reversible, hydraulic feed roll

³⁶

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1001 - MOUNTING KIT, 50/60, WEDGE STYLE
Option #1002 - MOUNTING KIT, 50/60, PIN-ON

• 24-hp (17.9-kW)^* V-Twin engine
• 48-in. (122-cm) Edge™ mower deck
• Easy Change™ 30-Second Oil Change System
• Assembled in Tennessee

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit. 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. 

• Mow up to 2 acres
• 24 HP^* (17.9 kW) V-Twin engine
• Mow up to 7 mph (11.2 km/h) with a 3-gal. (13.6 litre) fuel tank capacity
• Assembled in Tennessee
• 3-year/200-hour bumper-to-bumper warranty^**

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶