• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Mechanical side shift
• Hydraulic offset kit available
• Handle brush and turf grass

³⁶

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

Compatible with Mid Z 9 and 7 Series, Mid Z 994R, and ZTrak Z500 (E, M, R) with ROPS. Not compatible with 997R. Made of tough acrylic coated polyester. The lightweight, durable aluminum frame clamps to roll bar without drilling. Folds easily for removal.

This yard tool carrier kit is designed to carry yard tools like rakes and shovels. There are matching brackets for left, right, or both sides of the machine.

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

For 2032R and 2038R OOS tractors 2017 and newer; Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness, actuator, rotary dial and raise/lower lever. System must be calibrated after installation to insure accurate cut-heights. Refer to installation instructions for calibration procedure or refer to ServiceADVISOR.

Foot pegs are standard equipment on the ZTrak™ Z740R, Z530R and Z545R Mowers and optional field-installed kits on: Z500 Ztrak E- and M-Series models Z700 Ztrak E- and M-Series models Model year 2023 and newer Z300 ZTrak Mowers. These two-position foot pegs provide different foot placement options during operation.

The jack kit assists with service of the machine. There are holes pre-drilled in the cross member for ease of installation.

The LED light kit has two lights that are mounted on the front of the fenders.

• 7-gauge, 4.55-mm (0.179-in.) steel deck
• Quick-change, free-swinging blades
• iMatch™ quick-hitch compatible with conversion kit
• Replaceable skid shoes

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• The boarding step allows for easier mounting and dismounting of a zero-turn mower.
• A complete bolt-on solution, this kit attaches to the left side of the mower frame for convenient access.

• 17.5 hp (13-kW)^* Engine
• 42-in. (107-cm) Edge™ Mower Deck
• Spring-assisted hand grip lever raises and lowers deck easily
• Assembled in Tennessee

For 2025R tractors 2017 and newer; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages

• Achieve results just like the professionals.
• The attachment works extremely well with the suspended mower design.
• The attachments are easy to adjust for varying mower cutting height.
• The brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf.
• The brush fits the ZTrak 42-in. (107-cm) mower deck.
• The brush is very economical and functional.

• 19 hp (14.2 kW)^* Engine
• 42-in. (107-cm) Edge™ Mower Deck
• Hydrostatic transmission with side-by-side pedals
• Assembled in Tennessee

For 2025R tractors 2017 and newer; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages

• Fixed position
• Handle brush and turf grass
• Sharp knives reduce material size 
• Leaves finished look

³⁶

For 2025R tractors 2017 and newer; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

Compatible with Z300 ZTrak Mowers. Custom metal frame attaches to engine guard for a secure fit. Protects operator from the sun’s rays. Tough woven polyester construction for strength and durability.

• Gross Power: 48.5 kW (65 hp)
• Net Power: 45.6 kW (61 hp)
• Rated Operating Capacity: 965 kg (2,125 lb.)
• Operating Weight: 3824 kg (8,423 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

For 1023E and 1025R tractors built after June 2020; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

• This cover provides heavy-duty protection for EZtrak™ and ZTrak™ riding mowers.
• Protects against sun damage, rain, dust, birds, and tree sap.
• Dual reinforced air vents let air circulate and help prevent ballooning in winds.
• Elastic cord in bottom hem gives a quick and custom fit.
• Side handles are included for easy fitting and removal.

For 1023E and 1025R tractors built after June 2020; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages