- Driveline protection with slip-clutch or shear bolt
- Ready for tough conditions with 2-in. (5.08-cm) diameter cut capacity
- Easily attached with Quick Hitch and Quik-Knect™ compatibility
- Four available widths: 48, 60, 72, or 84 in. (121.9, 152.4, 182.9, or 213.4 cm)
36
- Reversible cutting edge
- Heavy duty welded steel end plates
- Quick-attach capability
36
The padded armrest kit is only compatible with Z700R and Z900 E, M,and R machines. Not compatible with Z997R Diesel model.
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
The trash receptacle kit includes the mounting bracket, picker, and bucket.
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
The cargo basket mounts to the rollover protective structure (ROPS) and sits over the engine. It creates more storage space on the machine and has a limited carrying capacity.
72D AutoConnect 7-Iron Mid-Mount Side-Discharge Mower; AutoConnect Mower Lift
For 2032R and 2038R OOS tractors 2017 and newer; Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness, actuator, rotary dial and raise/lower lever. System must be calibrated after installation to insure accurate cut-heights. Refer to installation instructions for calibration procedure or refer to ServiceADVISOR.
The toolbox provides more storage for smaller hand tools.
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
Rear Bumper
- A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
- The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
- Gear driven
- Available in forward or reverse rotating tines
- iMatchTM and/or quick hitch compatible
36
- High tensile, heavy-gauge steel frame
- Tines float while picking up and removing pallets on uneven terrain
- Tines can be made rigid at any position using set screws
36
- Driveline protection with slip-clutch or shear bolt
- Ready for tough conditions with 2-in. (5.08-cm) diameter cut capacity
- Easily attached with Quick Hitch and Quik-Knect™ compatibility
- Four available widths: 48, 60, 72, or 84 in. (121.9, 152.4, 182.9, or 213.4 cm)
36
The attachment bar and hitch kit provides towing capability for approved equipment. It also provides additional protection for the back of the machine.
NOTE: The loaded weight of any equipment towed by an EZtrak⌖ or a ZTrak⌖ Mower not to exceed 250 lb (113 kg).
- Chute deflector for easy snow removal
- Easily adjustable chute rotation
- Multiple hitch capabilities
- Optional hydraulic cylinder chute deflector available on select models
36
- Built-in seed dispersal rate chart and calibration
- Versatile. Handles multiple seed varieties
- iMatch™ and/or Quick Hitch compatible
36
- The string trimmer mount kit was designed specifically to accommodate a string trimmer.
- The brackets mount to the discharge side of the machine.
- Compatible with Z700 Series ZTrak Zero-Turn Mowers.
This yard tool carrier kit is designed to carry yard tools like rakes and shovels. There are matching brackets for left, right, or both sides of the machine.
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
- Parking Stand
- Dependable & Rugged Gearbox (6-year Warranty)
- Auger Alignment Handle
- Anti-Burying Auger Plate
36
- Adjustable Chute Deflector
- 245° Chute Rotation (Manual or Hydraulic)
- Adjustable and Replaceable Steel Skid Shoes
- iMatch™/Quick Hitch compatible
36
- All-welded frame
36
- Angling degree range
- Brush diameter is 32 inches for big jobs
- Optional dust suppression system
- Optional gauge wheel kit for setting height
36
RT3042R 42-inch Reverse Rotating Rotary Tiller
36
60D AutoConnect 7-Iron Mid-Mount Side-Discharge Mower; AutoConnect Mower Lift
For 2032R and 2038R OOS tractors 2017 and newer; Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness, actuator, rotary dial and raise/lower lever. System must be calibrated after installation to insure accurate cut-heights. Refer to installation instructions for calibration procedure or refer to ServiceADVISOR.
- Quick and easy connection
36
Order Summary
| Subtotal |
$76,167.95†
|
| Sales Tax | - |
| Estimated Total |
$76,167.95†
|
Please wait...
