The padded armrest kit is only compatible with Z700R and Z900 E, M,and R machines.  Not compatible with Z997R Diesel model.

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Replaceable and adjustable ripper shanks
• iMatchTM compatible
• Reversible blade
• Fixed tailgate

³⁶

• 25 hp^* (18.6 kW) EFI engine with Electronic Throttle Control
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty^**

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• 21-in. cut and sewn Seat
• 4 year/500 hour bumper-to-bumper warranty

• 5 - 9 ft. (1.5 - 2.8 m) cutting widths
• Single- or dual-belt drive with automatic belt idler
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Four-wheel independent suspension for excellent ride and handling
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement
• Comprehensive dash panel with speed indicator

• 23.5-hp (17.5-kW)
• 48”, 54”, and 60” 7Iron™ PRO decks
• Mow up to 10 mph
• Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation^**

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/500 hour bumper-to-bumper warranty

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• Cab only with 75 Engine HP
• HD Front Axle for commercial grade work
• Electro-hydraulic Hitch for precision depth control
• LED Headlights and Work Lights standard, LED Beacon Light optional

For pricing and additional discounts, see your local John Deere Dealer.

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

Adds a distinctive appearance and protects the front end of the tractor from damage. (Setup Included)

• 1524 mm (60 in.) Clearing Width Straight
• 1358 mm (53.5 in.) Clearing Width Fully Angled
• Replaceable Cutting Edge
• Heavy 7-Gauge, Curved Blade Angled Left or Right Up to 27 degrees
• Two Adjustable Heavy Duty Skid Shoes
• Reinforced Angle Bar on Back of Blade Spring Breakaway with Lock-Out Pin
• Compact tractors require dual selective control valve and front attaching support lit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

Composed of strong tubular steel that protects the unit from side impacts. Requires BM23458 front bumper or BM23459 heavy-duty bumper/brush guard. Compatible with Gator TS 4x2, TX 4x2, TX Turf and TH 6x4 Gas.

Setup Included.

• 25-hp (18.6 kW)^*, 810 cc engine
• 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

• Quick and easy connection

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

Base unit includes:

• 54-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 25.5-hp ^‡ (19-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

For Model Year 2016- Select Series Tractors (X330, X350, X354, X370, X380, X384, X390, X394, X350R, and X570 with manual lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• 25.5-hp (19 kW) iTorque™ Power System
• Power four-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Mow up to 2 acres
• 23 HP^* (17 kW) V-Twin engine
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• LED lights, floor mat, front bumper, rear hitch, covered storage come standard
• 3-year/200-hour bumper-to-bumper warranty^**

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• 23-hp (17.2 kW)^* FR series engine
• 48-, 54-, or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• 19 hp (14.2 kW)^* Engine
• 42-in. Edge™ Mower Deck
• Spring-assisted hand grip lever raises and lowers deck easily
• Operator station is wide and comfortable
• 15-in. Open-Back seat
• 2 year/120 hour bumper-to-bumper warranty

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible
  

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

Compatible with all 100 Series with 48 inch decks.

Expand the versatility of your 100 series lawn tractor with this easy-to-use 6.5 Bushel Rear Bagger. Includes hopper and chute but not front wheel weights which are recommended when bagging on uneven terrain. (Setup Included)

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

The trash receptacle kit includes the mounting bracket, picker, and bucket.

Setup Included.

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

For Select Series mowers with 48-in. Accel Deep mower decks. Hopper design provides modern styling, improved bagging performance, cleaner operation, and easy-to-empty bags. Blower fan and housing provide smooth grass flow even in wet and heavy grass. Price includes BUC11233 7-bu (247-L) 2-Bag Hopper Assembly (X300/X500 M-T), BM21681 Power Flow Chute (6.5/7bu), and BG20748 48A High-Performance Power Flow blower (X300/X500 M-T).

(Setup Included)

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

• Large, 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Hand lever releases 180-degree dump angle for complete emptying - Empties all material, Makes cleanup of the cart easier

(Setup Included)

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• All-welded frame

³⁶

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

• Bale push is integrated into machine
• Wrapping cycle shuts down when out of film
• 120 bales per hour
• Central control box operates all hydraulic functions

³⁶