• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

The attachment bar and hitch kit provides towing capability for approved equipment. It also provides additional protection for the back of the machine.

NOTE: The loaded weight of any equipment towed by an EZtrak⌖ or a ZTrak⌖ Mower not to exceed 250 lb (113 kg).

Setup Included.

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

Compatible with Z300 ZTrak Mowers. Custom metal frame attaches to engine guard for a secure fit. Protects operator from the sun’s rays. Tough woven polyester construction for strength and durability.

• AutoConnect™ deck compatible for deck attach/detach in seconds
  
• Cab or Open Station configuration available
• PowrReverser™ or E-hydro transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

• 24 hp (17.9 kW)^* V-Twin Extended Life Series (ELS) Engine
• 54-in. Edge™ Mower Deck
• Easy Change™ 30-Second Oil Change System
• Adjustable lumbar seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

• 21.5 HP^* V-Twin Engine
• 48-in. (122-cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit
• Comfortable 15-in (38-cm) open back seat
• K46 heavy-duty hydrostatic transmission
• Easy read fuel gauge 
• 3-year/200-hour bumper-to-bumper warranty

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• This cover provides heavy-duty protection for EZtrak™ and ZTrak™ riding mowers.
• Protects against sun damage, rain, dust, birds, and tree sap.
• Dual reinforced air vents let air circulate and help prevent ballooning in winds.
• Elastic cord in bottom hem gives a quick and custom fit.
• Side handles are included for easy fitting and removal.

• Bale push is integrated into machine
• Wrapping cycle shuts down when out of film
• 120 bales per hour
• Central control box operates all hydraulic functions

³⁶

• 25 hp* (18.6 kW) EFI engine with Electronic Throttle Control
• 48-in (122 cm), 54-in. (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty**

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

Snow Pushers are designed for:

• efficient snow removal
• parking lots, sidewalks, and driveways
• maneuvering around vehicles, buildings, fences, and other obstacles

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hardwired
• Electric feedgate

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• The boarding step allows for easier mounting and dismounting of a zero-turn mower.
• A complete bolt-on solution, this kit attaches to the left side of the mower frame for convenient access.

Uses the latest in three-spindle mowing technology to raise performance to a higher level. 10-gauge, 0.135-in. (3.4-mm) deck stamping for long life. Deep, flat-top deck design to handle a large volume of material at faster mowing speeds. Gives excellent cut quality and uniform discharge. Easy to keep clean on top of and under the deck. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system Compatible with high-performance Power Flow⌖ material collection systems. (Setup Included)

• 48-inch (122-cm) floating mower deck
• Powerful 19 hp (14.2 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

Compatible with Mid Z 9 and 7 Series, Mid Z 994R, and ZTrak Z500 (E, M, R) with ROPS. Not compatible with 997R. Made of tough acrylic coated polyester. The lightweight, durable aluminum frame clamps to roll bar without drilling. Folds easily for removal.

Setup Included.

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• 3-year/200-hour bumper-to-bumper warranty^**

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction. (Setup Included)

• Standard LED headlights and fender lights
• Hydro transmission with TwinTouch™ pedals for ease of use
• AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

• All-welded frame

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Powerful diesel engine with up to 4,000-lb (1,814 kg) towing capacity
• Power steering
• Cargo box with spray-in liner, brake and taillights
• Maxxis® Bighorn® 2.0 Extreme Terrain Radial Tires with steel wheels

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit.  NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. (Setup Included)

• Climate-controlled cab with heat and air conditioning
• Smooth, power steering
• Cargo box with spray-in liner, brake and taillights
  
• Up to 4,000-lb  towing capacity

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Edge™ Rear-discharge Deck
• Large capacity rear hopper easily emptied from operator seat
• 4 year/300 hour bumper-to-bumper warranty

• Modular Design
• Roll-Over Protective Structure (ROPS) Certified
• Steel Doors
• Sliding Glass Windows
• Front windshield wiper
• Safety Glass Rear Window

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

Setup Included.

Compatible with all 100 Series with 48 inch decks.

Expand the versatility of your 100 series lawn tractor with this easy-to-use 6.5 Bushel Rear Bagger. Includes hopper and chute but not front wheel weights which are recommended when bagging on uneven terrain. (Setup Included)

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

Multi-Purpose Buckets are designed

• with a heavy-duty design for increased durability
• with increased efficiency and capacity

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

The cargo basket mounts to the rollover protective structure (ROPS) and sits over the engine. It creates more storage space on the machine and has a limited carrying capacity.

Setup Included.

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

The trash receptacle kit includes the mounting bracket, picker, and bucket.

Setup Included.

Built exclusively for XUV835 and XUV865 Gator™ models, the WESTERN® IMPACT™ Heavy-Duty snow plows are professional-grade plows built to go anywhere that demands WESTERN-grade performance.

Constructed from high-strength, low alloy steel components, the straight blade features an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance. XUV835/XUV865 specific vehicle wiring and in-cab control mounting create a custom experience for Gator™ owners.

IMPACT heavy-duty plows also feature Scrape Lock for clean scraping and back dragging.

• 6' Wide x 23.5" Tall Straight Blade
• Hydraulic Lift & Angle with In-Cab Control includes Ram mount
• Quick Attach System with Full Blade Trip Protection
• Includes Plow Markers & Replaceable Cutting Edge Wear Bar
• Control connects with dash port wire harness. *requires BM26268 Dash Port Harness*
• Plow connects with E-Spec harness: E harness standard on M & R spec vehicles, XUV835E & XUV865E *requires BM26268 E Spec-Harness*

Compatible with:

• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Powerful diesel engine and ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• 5 - 9 ft. (1.5 - 2.8 m) cutting widths
• Single- or dual-belt drive with automatic belt idler
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

RS Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• self-clearing cuts
• stump-grinding with optional carbide teeth

• 17.5 hp (13 kW)^* Engine
• 42-in. Edge™ Mower Deck
• Hydrostatic Transmission w/side-by-side pedals
• Spring-assisted hand grip lever raises and lowers deck easily
• Operator station is wide and comfortable
• 2 year/120 hour bumper-to-bumper warranty

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Blade up and down is controlled by the vehicle winch.

• 6' Wide x 19.7" Tall Straight Blade
• Five position manual angling and winch lift
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability
• See brochure for loader series compatibility

³⁶

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible
  

³⁶

• 24-hp (17.9 kW)^* FS series engine
• 54- or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 22.5-in. seat with adjustable armrests, springs and ComfortGlide™ suspension
• Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 - 5 inches

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶