• 24 hp^* (17.9 kW) V-Twin engine
• 20-in. cut and sewn seat with ComfortGlide™ suspension
• 4-year/300-hour bumper-to-bumper warranty^**

• 25 hp* (18.6 kW) EFI engine with Electronic Throttle Control
• 48-in (122 cm), 54-in. (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty**

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• 21-in. cut and sewn Seat
• 4 year/500 hour bumper-to-bumper warranty

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• 3-year/200-hour bumper-to-bumper warranty^**

• 24 hp* (17.9 kW) V-Twin engine
• 48-in (122 cm), 54-in (137cm) and 60-in (152 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty**

• 24-hp (17.9 kW)^* FS series engine
• 54- or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 22.5-in. seat with adjustable armrests, springs and ComfortGlide™ suspension
• Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 - 5 inches

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements

• Heavy-duty paddle beater assemblies
• Poly-bonded floor
• Fine-spread rear pan available

³⁶

Base unit includes:

• 60-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 27-hp ^‡ (20.1-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• Chute deflector for easy snow removal
• Easily adjustable chute rotation
• Multiple hitch capabilities
• Optional hydraulic cylinder chute deflector available on select models

³⁶

• Powerful Final Tier 4-compliant diesel engine
• AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

Multi-Purpose Buckets are designed

• with a heavy-duty design for increased durability
• with increased efficiency and capacity

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

Composed of strong tubular steel, the heavy-duty bumper and brush guard protect the unit from front impacts, as well as add increased protection to the grille and headlights. Compatible with TS 4x2, TX 4x2, TH 6X4 Gas and TH 6X4 Diesel.

Setup Included.

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 600 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 6.0 Cu. Ft. Capacity (up to 480 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)
• T-Series: TH Gas, TH Diesel

²⁰

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

Composed of strong tubular steel that protects the unit from side impacts. Requires BM23458 front bumper or BM23459 heavy-duty bumper/brush guard. Compatible with Gator TS 4x2, TX 4x2, TX Turf and TH 6x4 Gas.

Setup Included.

Uses the latest in three-spindle mowing technology to raise performance to a higher level. 10-gauge, 0.135-in. (3.4-mm) deck stamping for long life. Deep, flat-top deck design to handle a large volume of material at faster mowing speeds. Gives excellent cut quality and uniform discharge. Easy to keep clean on top of and under the deck. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system Compatible with high-performance Power Flow⌖ material collection systems. (Setup Included)

• Quick and easy connection

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional skid shoes
  

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction. (Setup Included)

• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

• Mow up to 2 acres
• 20 HP^* (14.9 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• Maximum forward speed 7 mph (11.2 km/h) with 3-gal. (13.6-litre) fuel tank
• 3-year/200-hour bumper-to-bumper warranty^**

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Achieve results just like the professionals.
• The attachment works extremely well with the suspended mower design.
• The attachments are easy to adjust for varying mower cutting height.
• The brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf.
• The brush fits the ZTrak 42-in. (107-cm) mower deck.
• The brush is very economical and functional.

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible
  

³⁶

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• 18-in. cut and sewn seat
• 4 year/300 hour bumper-to-bumper warranty

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

• Excellent for pushing snow or other loose material.
• Blade surface is curved to roll than push material, which requires less power and increases blade capacity.
• Requires two UC13263 suit case weights and one BG20627 rear weight bracket. Tire chains are recommended for additional traction.

Setup Included.

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• 24 hp* (17.9 kW) V-Twin engine
• 48-in (122 cm), 54-in (137cm) and 60-in (152 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit
• 20-in. cut and sewn seat with ComfortGlide™ suspension
• 4-year/300-hour bumper-to-bumper warranty**

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

• 7-gauge, 4.55-mm (0.179-in.) steel deck
• Quick-change, free-swinging blades
• iMatch™ quick-hitch compatible with conversion kit
• Replaceable skid shoes

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• Fixed back plate for added rigidity
• Cutting edge is strategically positioned
• Fixed tailgate helps in rough situations
• Scarifier has three depth adjustments

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

Stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds. 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance. Optional MulchControl⌖ attachment provides superior mulching performance and versatility. Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance. Mower deck is suspended from the vehicle for a smooth and level cut. Adjustable mower wheels, positioned just above ground level, help reduce scalping. (Setup Included)

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Durable cutting edge
• Adjustable skid shoes
• Hydraulic chute deflector
• Field-installed cutting edge kits

³⁶

• Powerful diesel engine and ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

• Standard LED headlights and fender lights
• Premium Operator Station with deluxe seat suspension and armrests
• AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

Snow Blades are designed for:

• snow removal
• light dirt work
• four different blade positions

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

The jack kit assists with service of the machine. There are holes pre-drilled in the cross member for ease of installation.

Setup Included.

• 25.5-hp (19.0 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
• Electronic throttle control and power two-wheel steer
• 4 year/500 hour bumper-to-bumper warranty

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶

Provides mounting for 5-gal. (19-L) bucket and trash-grabbing apparatus (not included). It enables trash pickup and storage without having to leave the mower seat. Compatible with Commercial ZTrak Mowers.

Setup Included.

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying. (Setup Included)

• Quick and Easy Connection
• Heavy-Duty Design to Tackle Tough Jobs
• Stability for Easy Compact Storage
• Hydraulics Mounted for Improved Protection

³⁶

• Our fastest Mid-Size XUV with power steering
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement
• Enhanced dash display for operation at a glance

The cargo basket mounts to the rollover protective structure (ROPS) and sits over the engine. It creates more storage space on the machine and has a limited carrying capacity.

Setup Included.

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Adjustable Chute Deflector
• 245° Chute Rotation (Manual or Hydraulic)
• Adjustable and Replaceable Steel Skid Shoes
• iMatch™/Quick Hitch compatible

³⁶

Large 1,000 lb. capacity, 17 cu. ft. load limit. Heavy-duty poly bed won't dent or rust. 16" x 6.50" pneumatic 4 ply turf tread tires for maximum traction. Quick-release dumping action with steep angle for complete emptying. (Setup Included)

Compatible with 100, 200, X300, X500, and X700 Series. Haul a variety of materials. Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together. Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart. The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.1,000 lb. (454 kg) load limit. (Setup Included)

The LED light kit has two lights that are mounted on the front of the fenders.

Setup Included.

• Heavy-duty wear shields for added gear case protection
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth
• Category 2 quick hitch compatible

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶