17 cu. ft. (heaped) capacity, 1,000 lb. load limit. Heavy duty reinforced structural frame to handle heavy loads, high speed and off-road terrain. Features double-sealed, high speed roller bearings. Positive lock system to prevents unintentional unlatching during intense use. Heavy duty polyethylene bed accepts dividers that can be made with the included template. (Setup Included)

• Powerful diesel engine and ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Reversible cutting edges
• Trip-edge protection
• Optional skid shoes
• Optional hydraulic angle adjustment unit available for AF10 (F)

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability
• See brochure for loader series compatibility

³⁶

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• 21.5 HP^* V-Twin Engine
• 42-in. (107-cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit
• Comfortable 15-in (38-cm) open back seat
• K46 heavy-duty hydrostatic transmission
• Easy read fuel gauge
• 3-year/200-hour bumper-to-bumper warranty

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

• Heavy-duty paddle beater assemblies
• Poly-bonded floor
• Fine-spread rear pan available

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Rugged, tubular frame enhances durability
• Quick, easy attachment
• Replaceable spears
• See brochure for loader series compatibility

³⁶

• Mow up to 2 acres
• 23 HP^* (17 kW) V-Twin engine
• 20-inch (50.8 cm) high-back custom-tailored seat with arm rests
• LED lights, floor mat, front bumper, rear hitch, covered storage come standard
• 3-year/200-hour bumper-to-bumper warranty^**

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• Reversible cutting edge
• Welded skid shoes
• Rubber blade edges

³⁶

• 1524 mm (60 in.) Clearing Width Straight
• 1358 mm (53.5 in.) Clearing Width Fully Angled
• Replaceable Cutting Edge
• Heavy 7-Gauge, Curved Blade Angled Left or Right Up to 27 degrees
• Two Adjustable Heavy Duty Skid Shoes
• Reinforced Angle Bar on Back of Blade Spring Breakaway with Lock-Out Pin
• Compact tractors require dual selective control valve and front attaching support lit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• Heavy-duty wear shields for added gear case protection
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth
• Category 2 quick hitch compatible

³⁶

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 600 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 6.0 Cu. Ft. Capacity (up to 480 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)
• T-Series: TH Gas, TH Diesel

²⁰

• Quick and easy connection

³⁶

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• Adjustable tines
• Steel tines and waffle plates Angled tine beam
• iMatch^TM compatible
  

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

GS-Series Scrap Grapples are designed for:

• scrap handling
• recycling center
• disaster cleanup
• jobsite cleanup applications
  

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

• Corrosion-resistant, powder-coat paint increases durability
• Replaceable shares, shins, and landslides extend life

³⁶

• Diesel engine and smooth power steering
• Multi-passenger capability for four people
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hardwired
• Electric feedgate

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

Based on the material your operation most commonly uses for de-icing, the WESTERN® MARAUDER™ line offers the best material delivery system for you. The S035A and S035C are purpose-built for mid-duty UTVs and compact trucks.

• 0.35 Cu. Yd. Capacity (up to 750 Lbs. of material)
• Corrosion Resistant Stainless Steel Tub
• Chain drive material delivery system
• Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)
• T-Series: TH Gas, TH Diesel

²⁰

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• Multi-passenger capability for four people
• Our fastest Mid-Size XUV with power steering
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Provides protection from the sun's rays.
• Mounts to heavy-duty CargO Mounts.

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• Hydraulic Controls to raise & lower

³⁶

• Climate-controlled cab with heat and air conditioning
• Smooth, power steering
• Cargo box with spray-in liner, brake and taillights
  
• Up to 4,000-lb  towing capacity

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

Compatible with E100, X300, X500, X700 and Residential ZTrak models. 7-cu.ft. heaped box capacity; premium molded, high-density polyethylene box construction; compression molded for superior strength and durability. (Setup Included)

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

• All-welded frame

³⁶

• Powerful and reliable Yanmar Diesel Engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• Standard LED headlights and fender lights
• Comfortable, marine-grade seat stays in top condition
• Larger, heavier frame for added stability
• Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

• Requires third hydraulic loader function
• Click pin and pivot pin replacement for ease of assembling and disassembling
• Tooth pattern designed for gripping, not piercing

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• 7-gauge, 4.55-mm (0.179-in.) steel deck
• Quick-change, free-swinging blades
• iMatch™ quick-hitch compatible with conversion kit
• Replaceable skid shoes

³⁶

• 36-inch (91-cm) floating mower deck
• Smooth-running, 14.5 hp (10.8 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Fully hydraulic blade controls allow the operator to make the necessary blade adjustments quickly from inside the cab for fast and efficient winter cleanup.

• 6' Wide x 19.7" Tall Straight Blade
• Hydraulic Lift & Angle with In Cab Control
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™, TX Turf

²⁰

• 22 HP^* Cyclonic V-Twin Engine
• 42-in. (107-cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit
• Comfortable 15-in (38-cm) open-back seat
• Side-by-side forward and reverse pedals
• 3-year/200-hour bumper-to-bumper warranty

• 36-inch (91-cm) floating mower deck
• Powerful 15.5 hp (11.6 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Mow up to 2 acres
• 21.5 HP^* (16 kW) V-Twin engine
• 42-in. (107 cm) Accel Deep™ Mower Deck
• 20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch
• 3-year/200-hour bumper-to-bumper warranty^**

• 24 hp (17.9 kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/500 hour bumper-to-bumper warranty

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse pedals
• 4 year/300 hour bumper-to-bumper warranty

• 25 hp^* (18.6 kW) EFI engine with Electronic Throttle Control
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty^**

• Cab only with 75 Engine HP
• HD Front Axle for commercial grade work
• Electro-hydraulic Hitch for precision depth control
• LED Headlights and Work Lights standard, LED Beacon Light optional

For pricing and additional discounts, see your local John Deere Dealer.

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• 7-Iron™ PRO deck
• Mulch On Demand™ Available
• Gasoline Engine
• Propane Option Available
• Rear Discharge Deck

• Standard LED headlights and fender lights
• Comfortable, marine-grade seat stays in top condition
• Larger, heavier frame for added stability
• Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• 25 hp* (18.6 kW) EFI engine with Electronic Throttle Control
• 48-in (122 cm), 54-in. (137 cm) and 60-in. (152 cm) High Capacity mower deck, compatible with optional MulchControl™ kit
• 22.5-in seat with armrests and ComfortGlide™ suspension
• 4-year/500-hour bumper-to-bumper warranty**

• Climate-controlled cab with heat and air conditioning
• Powerful diesel engine with up to 4,000-lb towing capacity
• Power steering
• Cargo box with spray-in liner, brake and taillights

• 61-inch (155-cm) floating mower deck
• Powerful 23.5 hp (17.5 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶