• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Assembled in Georgia
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

• 48-inch (122-cm) floating mower deck
• Powerful 19 hp (14.2 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Gross Rated Power: 88.0 kW (118.0 hp)
• Net Peak Power: 85.5 kW (114.7 hp)
• Rated Operating Capacity: 1816 kg (4,000 lb.) with 1 standard counterweight set
• Operating Weight: 4660 kg (10,264 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit. 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. 

• Gross Power: 51.7 kW (69 hp)
• Net Power: 49.4 kW (66 hp)
• Rated Operating Capacity: 994 kg (2,190 lb.)
• Operating Weight: 3246 kg (7,150 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Assembled in Georgia
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

Base unit includes:

• 60-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 27-hp ^‡ (20.1-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power four-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Assembled in Wisconsin
• Available in 48-, 54-, and 60-inch mower deck sizes

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3006 - 16-19 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3007 - 16-19 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3008 - 16-19 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3009 - 20-24 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3010 - 20-24 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3011 - 20-24 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3012 - 27-35 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3013 - 27-35 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3014 - 27-35 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3015 - 36-44 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3016 - 36-44 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3017 - 36-44 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying.

• Gross Power: 55.0 kW (74 hp)
• Net Power: 52.5 kW (70 hp)
• Rated Operating Capacity: 1221 kg (2,690 lb.)
• Operating Weight: 3496 kg (7,700 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Modular Design
• Roll-Over Protective Structure (ROPS) Certified
• Steel Doors
• Sliding Glass Windows
• Front windshield wiper
• Safety Glass Rear Window

Uses the latest in three-spindle mowing technology to raise performance to a higher level. 10-gauge, 0.135-in. (3.4-mm) deck forged steel for long life. Deep, flat-top deck design to handle a large volume of material at faster mowing speeds. Gives excellent cut quality and uniform discharge. Easy to keep clean on top of and under the deck. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system Compatible with high-performance Power Flow⌖ material collection systems.

• Finger joint drive system
• Hydraulic tine pitch control
• Hydraulic fold for easy transport
• Hands-free locking transport wheels

³⁶

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

• Factory-installed 440R Quick Park™ Loader Mounting System included
• Turbocharged diesel engine
• eHydrostatic Transmission
• Assembled in Georgia
• Standard mid and rear hydraulics
• Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

Provides mounting for 5-gal. (19-L) bucket and trash-grabbing apparatus (not included). It enables trash pickup and storage without having to leave the mower seat. Compatible with Commercial ZTrak Mowers.

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

Base unit includes:

• 72-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 35-hp ^‡ (26.1-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Edge™ Rear-discharge Deck
• Large capacity rear hopper easily emptied from operator seat
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Assembled in Georgia
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• 47-in. (119-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit.
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Assembled in Georgia
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction.

• 36-inch (91-cm) floating mower deck
• Smooth-running, 14.5 hp (10.8 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

Base unit includes:

• 24.7 hp (18.4 kW) liquid-cooled diesel engine
• 11.5 U.S. gallon fuel tank (43.5 L)
• 54-in. (137-cm) 7-Iron PRO Side-Discharge Deck included; other deck options available for additional cost
• Fully Adjustable Suspension Seat with Armrests; another seat option available  
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• 27-hp (20 kW) FX Series V-Twin engine
• 54- or 60-in. High-Capacity PRO mower deck with welded reinforcements
• 24-in. seat with fully adjustable mechanical suspension
• Assembled in North Carolina
• Cut-height adjustment dial, moves mower in ¼-in. increments from 1.5-5 in.

• 36-inch (91-cm) floating mower deck
• Powerful 15.5 hp (11.6 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience