• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 250 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 2.5 Cu. Ft. Capacity (up to 200 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• XUV 845 & XUV 875
• HPX615 & HPX815
• XUV835 & XUV865 E,M,R
• XUV560 & XUV590
• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Widths ranging from 48-60 in
• iMatch^TM compatible
  
• Rotate a full 360 degrees with 5 forward and 5 reverse settings

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

• Adjustable Chute Deflector
• 245° Chute Rotation (Manual or Hydraulic)
• Adjustable and Replaceable Steel Skid Shoes
• iMatch™/Quick Hitch compatible

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Straight blade aerator rotor aerates soil and incorporates seed in one step
• Rear cultipacker levels and smooths seedbed
• Front gauge roller levels ground, controls seed depth
• iMatch^TM compatible

³⁶

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• Field-installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Replaceable and adjustable ripper shanks
• iMatchTM compatible
• Reversible blade
• Fixed tailgate

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• 14-bushel collection hopper
• Integrated parking stand is standard 
• Available with optional locking casters
• Boot attaches to compatible mower deck without using tools
• iMatch™ compatible

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hardwired
• Electric feedgate

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶