• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up

• Mechanical side shift
• Hydraulic offset kit available
• Handle brush and turf grass

³⁶

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

• Mechanical side shift
• Hydraulic offset kit available
• Handle brush and turf grass

³⁶

This yard tool carrier kit is designed to carry yard tools like rakes and shovels. There are matching brackets for left, right, or both sides of the machine.

Setup Included.

• Premium HVAC cab with light-stone interior
• Cargo box power lift
• LED headlights
• Up to 4,000-lb towing capacity

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Belt-driven cutter blades
• Adjustable skid shoes
• Cutting arm flexes up to 90 degrees, or as low as -45 degrees
• iMatch^TM compatible

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• 34.5-hp (25.7-kW) EFI
• 60” 7Iron™ PRO deck
• Mow up to 12 mph
• Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation^**

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

³⁶

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hardwired
• Electric feedgate

Compatible with:

• XUV560 & XUV590 (2016 - current)

²⁰

• Interfaces with smaller John Deere loader models that use the hook and pin Quick Attach carrier
• All-welded frame
• One-year warranty

³⁶

• 24 hp (17.9 kW)^* V-Twin Extended Life Series (ELS) Engine
• 48-in. Edge™ Mower Deck
• Easy Change™ 30-Second Oil Change System
• Adjustable lumbar seat and standard front bumper
• 2 year/120 hour bumper-to-bumper warranty

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Field-installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubbert insert conversion kit keeps discharge from clogging

³⁶

• When installing 3-Bag MCS on Z900B and Z900E Models, Rear Anti-Scalp Wheel Kit is required  
• Not Compatible with Model Year 2012 and Prior ZTrak Mowers
• Not Compatible with Michelin X Tweel Turf Tires
• Weights not included

Setup Included.

• 48-inch (122-cm) floating mower deck
• Powerful 19 hp (14.2 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

Compatible with E100, X300, X500, X700 and Residential ZTrak models. 7-cu.ft. heaped box capacity; premium molded, high-density polyethylene box construction; compression molded for superior strength and durability. (Setup Included)

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

Built exclusively for XUV835 and XUV865 Gator™ models, the WESTERN® IMPACT™ Heavy-Duty snow plows are professional-grade plows built to go anywhere that demands WESTERN-grade performance.

Constructed from high-strength, low alloy steel components, the straight blade features an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance. XUV835/XUV865 specific vehicle wiring and in-cab control mounting create a custom experience for Gator™ owners.

IMPACT heavy-duty plows also feature Scrape Lock for clean scraping and back dragging.

• 6' Wide x 23.5" Tall Straight Blade
• Hydraulic Lift & Angle with In-Cab Control includes Ram mount
• Quick Attach System with Full Blade Trip Protection
• Includes Plow Markers & Replaceable Cutting Edge Wear Bar
• Control connects with dash port wire harness. *requires BM26268 Dash Port Harness*
• Plow connects with E-Spec harness: E harness standard on M & R spec vehicles, XUV835E & XUV865E *requires BM26268 E Spec-Harness*

Compatible with:

• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• 7 tines at 1.25 In. diameter solid round steel
• Multiple working widths to match tractor requirements
• Increased uptime with quick-change capability 

³⁶

• Pull-type unit with drawbar
• Adjustable discharge chute
• Reversible, hydraulic feed roll

³⁶

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 250 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 2.5 Cu. Ft. Capacity (up to 200 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• HPX615 & HPX815
• XUV835 & XUV865 E,M,R
• XUV560 & XUV590
• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• Adjustable skid shoes
• Multiple hitch capabilities
• Hydraulic drum rotation
• Gearbox reducer kit

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Ultimate HVAC cab with genuine leather seats
• 7-speaker infotainment system with touchscreen
• Rear-facing camera and sliding rear window
• Versatile Bumper Pro Brush Guard

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• 48-inch (122-cm) floating mower deck
• Smooth-running, 14.5 hp (10.8 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Fixed position
• Handle brush and turf grass
• Sharp knives reduce material size 
• Leaves finished look

³⁶

• Reversible cutting edge
• Heavy duty welded steel end plates
• Quick-attach capability

³⁶

• 25.5-hp (19 kW) iTorque™ Power System
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• Finger joint drive system
• Hydraulic tine pitch control
• Hydraulic fold for easy transport
• Hands-free locking transport wheels

³⁶

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

Setup Included.

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

• Adjustable Chute Deflector
• 245° Chute Rotation (Manual or Hydraulic)
• Adjustable and Replaceable Steel Skid Shoes
• iMatch™/Quick Hitch compatible

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

Compatible with Z300 ZTrak Mowers. Custom metal frame attaches to engine guard for a secure fit. Protects operator from the sun’s rays. Tough woven polyester construction for strength and durability.

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• Heavy-duty paddle beater
• Poly-bonded floor
• Field-installed top beater kits
• Hydraulic conversion kits

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 mm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• 4 year/500 bumper-to-bumper warranty

• High tensile, heavy-gauge steel frame
• Tine position is adjustable. No tools required

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

• Reversible cutting edge
• Welded skid shoes
• Rubber blade edges

³⁶

• Quick and Easy Connection
• Heavy-Duty Design to Tackle Tough Jobs
• Stability for Easy Compact Storage
• Hydraulics Mounted for Improved Protection

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/500 hour bumper-to-bumper warranty

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

When winter won’t wait, the WESTERN® LOW-PRO 300W wireless electric tailgate spreader quickly mounts onto pickup trucks, SUVs, utility vehicles, and tractors without drilling or wiring. Standard with a completely wireless key fob control, 2″ receiver hitch, and a 7-pin plug, this is THE ultimate in plug ‘n’ play convenience for salt spreaders.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Wireless on/off control

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

• Reversible cutting edge
• Welded skid shoes
• Rubber blade edges

³⁶

• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

Snow Blades are designed for:

• snow removal
• light dirt work
• four different blade positions