• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

• Corrosion-resistant, powder-coat paint increases durability
• Steel shank

³⁶

The WESTERN® Tornado™ UTV 11 cu ft poly hopper spreader is built just for UTVs. It features a sturdy, compact design that delivers many features of the larger models, in a size just right for your utility vehicle.

• 0.4 Cu. Yd. Capacity (up to 880 Lbs. of material)
• Corrosion Resistant Poly Tub with Fitted Tarp Cover
• Auger drive material delivery system
• Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

When precision is needed with salt placement, the new line of stainless steel drop spreaders from Western Products is the answer. The Drop 250 spreader provides up to 36″ of spread width in a drop pattern so the salt stays exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other paved surfaces where truck equipment can’t easily gain access.

• 2.5 Cu. Ft. Capacity (up to 200 Lbs. of material)
• Includes 2" receiver, cargo bed mount & 3-Point mount standard
• Corrosion Resistant Stainless Steel Tub with Top Screen & Fitted Plastic Cover
• Variable width drop spread pattern
• 30” 33” or 36" Drop Spread Width
• Ideal for Treating Sidewalks and controlled application
• Digital Variable Material Flow with in Cab Control

Compatible with:

• HPX615 & HPX815
• XUV835 & XUV865 E,M,R
• XUV560 & XUV590
• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• 48-inch (122-cm) floating mower deck
• Powerful 19 hp (14.2 kW) V-twin engine
• Self-propelled hydrostatic drive system
• Easy-to-use controls for operator comfort and convenience

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Heavy-duty paddle beater
• Poly-bonded floor
• Field-installed top beater kits
• Hydraulic conversion kits

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• All-welded frame

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission Options
• Cab or Open Station configurations
• Premium features: Hitch Assist, Aux Hitch Control, HST controls

For pricing and additional discounts, see your local John Deere Dealer.

Based on the material your operation most commonly uses for de-icing, the WESTERN® MARAUDER™ line offers the best material delivery system for you. The S035A and S035C are purpose-built for mid-duty UTVs and compact trucks.

• 0.35 Cu. Yd. Capacity (up to 750 Lbs. of material)
• Corrosion Resistant Stainless Steel Tub
• Auger drive material delivery system - Up to 30' Spread Width
• Ideal for Treating Pedestrian Areas and Small Parking Lots
• Digital Dual Variable Spread Pattern/Material Flow in Cab Control

Compatible with:

• HPX615E & HPX815E (2018 - current)
• XUV835 & XUV865 E,M,R (2017 - current)
• T-Series: TH Gas, TH Diesel

²⁰

Snow Blades are designed for:

• snow removal
• light dirt work

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

• Protects new seats and renews old seats
• Cushioned seat for extra comfort
• Four convenient pockets for keeping tools and gear within reach
• Elastic cord in bottom hem for a custom fit
• Fits 18-in. (46-cm) seats used on model year 2021 and newer X354, X370, X380, X384, X390, and X394 Tractors (serial number 110,001-) with optional armrests
• Fits 18-in. (46-cm) seat used on Z345M, Z335M, Z345R, Z355R, Z375R, Z535M, and Z540M (without rollover protective structure [ROPS])
• Fits 18-in. (46-cm) and 20-in (51-cm) seats used on Z315, Z325E, Z320M, Z330M, Z320R, and Z330R ZTrak Mowers

• High-capacity design allows for high volume crop flow
• Large rake wheels minimize leaf loss
• Rake with one or both arms as needed
• Optional center kicker wheel

³⁶

• When installing 3-Bag MCS on Z900B and Z900E Models, Rear Anti-Scalp Wheel Kit is required  
• Not Compatible with Model Year 2012 and Prior ZTrak Mowers
• Not Compatible with Michelin X Tweel Turf Tires
• Weights not included

Setup Included.

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

• Rugged, tubular frame enhances durability
• Quick, easy attachment
• Replaceable spears
• See brochure for loader series compatibility

³⁶

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• 22-hp (16.4-kW)^* Cyclonic engine
• 48-in. Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• 4 year/300 hour bumper-to-bumper warranty

• Three person cockpit with enhanced dash display
• Easier shifting, with integrated park position
• Electronic switch for instant 4WD engagement
• Up to 4,000-lb towing capacity

The attachment bar and hitch kit provides towing capability for approved equipment. It also provides additional protection for the back of the machine.

NOTE: The loaded weight of any equipment towed by an EZtrak⌖ or a ZTrak⌖ Mower not to exceed 250 lb (113 kg).

Setup Included.

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Dependable, rugged gearbox
• Safety shielding covers auger and power take-off
• Optional downforce kits
• Optional hook-up stand
  

³⁶

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

• 23-hp (17.2-kW)^* iTorque™ Power System
• 54-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• iMatchTM compatible 
• John Deere Quik-Knect™ compatible
• Front and rear chain shields standard
• PTO slip clutch standard
• 3-year limited gear box warranty

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

Performance advantages of a two-spindle mower in a wide 42-in. (107-cm) size. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system. Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system. (Setup Included)

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• Reversible cutting edges
• Trip-edge protection
• Optional skid shoes
• Optional hydraulic angle adjustment unit available for AF10 (F)

³⁶

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

Setup Included.

• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• 5 - 9 ft. (1.5 - 2.8 m) cutting widths
• Single- or dual-belt drive with automatic belt idler
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• 7 tines at 1.25 In. diameter solid round steel
• Multiple working widths to match tractor requirements
• Increased uptime with quick-change capability 

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

• 54-in. (137-cm) clearing width straight
• 48-in. (122-cm) clearing width angled
• Replaceable cutting edge
• Heavy 11-gauge, curved blade angled left or right up to 27 degrees
• Two-adjustable skid shoes
• Reinforced angle bar on back of blade spring breakaway with lock-out pin
• BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
• Compact tractors require dual selective control valve and front attaching support kit.

• Thermal switch protects hydraulic system
• Rear quick connects
• Optional oil cooler unit

³⁶

Adds a distinctive appearance and protects the front end of the tractor from damage. (Setup Included)

• 25.5-hp (19 kW) iTorque™ Power System
• Power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

Compatible with E100, X300, X500, and X700 models. The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include: Compatible with riding lawn tractors and garden tractors; Durable poly construction; All-terrain pneumatic tires; Converts from tow cart to push cart without tools; Large handle is provided for ease of use (Setup Included)

• 17.5 hp (13 kW)^* Engine
• 42-in. Edge™ Mower Deck
• Hydrostatic Transmission w/side-by-side pedals
• Spring-assisted hand grip lever raises and lowers deck easily
• Operator station is wide and comfortable
• 2 year/120 hour bumper-to-bumper warranty

• Quick and Easy Connection
• Heavy-Duty Design to Tackle Tough Jobs
• Stability for Easy Compact Storage
• Hydraulics Mounted for Improved Protection

³⁶

• Modular Design
• Roll-Over Protective Structure (ROPS) Certified
• Steel Doors
• Sliding Glass Windows
• Front windshield wiper
• Safety Glass Rear Window

• 20-bushel collection hopper
• Electronic dump-from-seat function is standard
• Available with optional locking casters
• Boot attaches to compatible mower deck without using tools
• iMatch™ compatible

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

³⁶

• Remove snow while driving forward
• 80-inch clearing capacity
• 245° hydraulic chute rotation
• Hydraulic chute deflector - field installed

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶