• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• Replaceable and adjustable ripper shanks
• iMatchTM compatible
• Reversible blade
• Fixed tailgate

³⁶

• Gross Power: 54.8 kW (74 hp)
• Net Power: 52.5 kW (70 hp)
• Rated Operating Capacity: 1 176 kg (2,590 lb.)
• Operating Weight: 4 313 kg (9,500 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Built by John Deere in Greeneville, Tennessee: Features a comfortable 22.5-in cut and sewn seat with armrests and ComfortGlide™, cup holder, side and under-seat storage compartments, color-coded controls for easy identification, low-fuel warning light, foldable Roll-Gard rollover protective structure (ROPS), and retractable seat belt
• Rubber floor mats, toe board mat, foot lift, premium handlebars, LED headlights, and rear hitch come standard on this model
• 25-hp ^‡ (18.6-kW), John Deere branded EFI V-Twin engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions – most suitable for a flat terrain with obstacles, two plus acres 
• Mow well fast with the 48-in. (122-cm) twin blade High-Capacity Mower Deck, engineered to process tall grass at faster speeds
• Dual Hydrostatic Tuff Torq® transmission with 1-in. axles for power and durability, maximum speed 8-mph - steer using motion-control levers, effective over long, level tracks of land or around trees, shrubs and flower beds
• Hassle-Free Ownership: John Deere 4-year/500-hour bumper-to-bumper warranty, local John Deere dealer support and a 10-Point Pre-Delivery Inspection prior to sale

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• Gross Power: 48.5 kW (65 hp)
• Net Power: 45.6 kW (61 hp)
• Rated Operating Capacity: 965 kg (2,125 lb.)
• Operating Weight: 3824 kg (8,423 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Widths ranging from 48-60 in
• iMatch^TM compatible
  
• Rotate a full 360 degrees with 5 forward and 5 reverse settings

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Gross Rated Power: 80.9 kW (108.5 hp)
• Net Peak Power: 78.9 kW (105.8 hp)
• Rated Operating Capacity: 1748 kg (3,850 lb.)
• Operating Weight: 5531 kg (12,183 lb.)
• Bucket Breakout Force: 6243 kg (13,750 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

Multi-Purpose Buckets are designed

• with a heavy-duty design for increased durability
• with increased efficiency and capacity

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

• Reversible cutting edges
• Trip-edge protection
• Optional skid shoes
• Optional hydraulic angle adjustment unit available for AF10 (F)

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

• Replaceable and adjustable ripper shanks
• iMatchTM compatible
• Reversible blade
• Fixed tailgate

³⁶

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

• Gross Rated Power: 73.0 kW (98.0 hp)
• Net Peak Power: 70.8 kW (95.0 hp)
• Rated Operating Capacity: 1430 kg (3,150 lb.)
• Operating Weight: 5409 kg (11,914 lb.)
• Bucket Breakout Force: 4994 kg (11,000 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• Gross Horsepower: 88.0 kW (118.0 hp)
• Net Horsepower: 85.5 kW (114.7 hp)
• Rated Operating Capacity: 1827 kg (4,025 lb.) with 1 counterweight
• Operating Weight: 5584 kg (12,300 lb.) / 6148 kg (13,542 lb.) with SG96 Dozer Blade

For pricing and additional discounts, see your local John Deere Dealer.

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

Bale Spears are

• built for a long working life and designed for the loading, carrying, and stacking.
• designed to provide visibility to the bale spear and tine tips.
• replaceable and come in three different configurations of single, dual, or triple to help match numerous bale-handling applications.

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

³⁶

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• 1524 mm (60 in.) Clearing Width Straight
• 1358 mm (53.5 in.) Clearing Width Fully Angled
• Replaceable Cutting Edge
• Heavy 7-Gauge, Curved Blade Angled Left or Right Up to 27 degrees
• Two Adjustable Heavy Duty Skid Shoes
• Reinforced Angle Bar on Back of Blade Spring Breakaway with Lock-Out Pin
• Compact tractors require dual selective control valve and front attaching support lit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

Bale Huggers are designed for

• large round and rectangular bales.
• squeezing bales together for transport, stacking, and loading.
• maximum durability and prevention of damage to bale wrappings/coverings with round tubing.

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• Strong 4x4 steel frame
• iMatch^TM compatible
• Steel tines and waffle plates
• Adjustable tine beam

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3006 - 16-19 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3007 - 16-19 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3008 - 16-19 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3009 - 20-24 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3010 - 20-24 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3011 - 20-24 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3012 - 27-35 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3013 - 27-35 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3014 - 27-35 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3015 - 36-44 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3016 - 36-44 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3017 - 36-44 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• 21.5-hp (16 kW)^* V-Twin Engine
• Choice of 42- or 48-in. (107- or 122-cm) Accel Deep™ Mower Decks, compatible with optional MulchControl™ kit
• Electric PTO, heavy-duty hydrostatic transmission with side-by-side pedals
• Assembled in Tennessee

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• 22-hp (16.4-kW)^* cyclonic V-Twin engine
• Choice of 42- or 48-in. (107- or 122-cm) Accel Deep™ Mower Decks, compatible with optional MulchControl™ kit
• Hydrostatic transmission with side-by-side forward and reverse pedals
• Assembled in Tennessee

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• Cutting edge is strategically positioned
• Floating tailgate helps in rough Conditions
• Match™ compatible for quick, efficient hookup
• Scarifier has three depth adjustments

³⁶

• John Deere has paired proven expertise in compact equipment with Wirtgen Group, the market leader in milling machines and cutting technology, to deliver this new lineup of customer-inspired cold planers.
• Rugged new CP18G, CP24G, and CP30G models can slide horizontally from left to right, for ultra-capable
  control, and are designed for easy pick replacement, to boost uptime.
• Exclusive Tilt-Float/Tilt-Lock feature makes these cold planers ideal for everything from repairing parking lots to cleaning around larger milling machines.

Snow Blades are designed for:

• snow removal
• light dirt work
• four different blade positions

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3006 - 16-19 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3007 - 16-19 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3008 - 16-19 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3009 - 20-24 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3010 - 20-24 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3011 - 20-24 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3012 - 27-35 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3013 - 27-35 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3014 - 27-35 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3015 - 36-44 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3016 - 36-44 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3017 - 36-44 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Widths ranging from 48-60 in
• iMatch^TM compatible
  
• Rotate a full 360 degrees with 5 forward and 5 reverse settings

³⁶

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

Snow Pushers are designed for:

• efficient snow removal
• parking lots, sidewalks, and driveways
• maneuvering around vehicles, buildings, fences, and other obstacles

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Adjustable tines
• Steel tines and waffle plates Angled tine beam
• iMatch^TM compatible
  

³⁶

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional skid shoes
  

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

Rollout buckets feature:

• an open design that enables quick, clean, and easy material loading.
• three sizes for achieving elevated dump heights in high-capacity applications, including construction, forestry, agriculture, demolition, recycling, and land management.
• standard universal bolt-on cutting edge that is double beveled and reversible, for extended wear life.

Rotary Tillers:

• till up to a six-inch depth.
• provide long service life and excellent operation in all conditions.
• require only standard hydraulic flow for high-quality performance.

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

GS-Series Scrap Grapples are designed for:

• scrap handling
• recycling center
• disaster cleanup
• jobsite cleanup applications
  

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3006 - 16-19 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3007 - 16-19 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3008 - 16-19 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3009 - 20-24 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3010 - 20-24 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3011 - 20-24 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3012 - 27-35 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3013 - 27-35 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3014 - 27-35 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3015 - 36-44 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3016 - 36-44 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3017 - 36-44 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1001 - Mounting Adapter Kit, 26 and 30 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1002 - Mounting Adapter Kit, 35 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1012 - Mounting Adaptor Kit, 35 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.