TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

Mulching Heads are built to

• remove up to 8-inch trees and 12-inch stumps.
• shred underbrush and woody materials into beneficial mulch in minutes
• 60-inch high-capacity, smooth rotor design reduces material drag and horsepower requirements.

Option #2000 - Mulching Head Smooth Rotor: Used for ground engagement of 1-2". The smooth drum creates less of a HP draw when mixing wood material into the top layer of the dirt. Spiral design also makes it so that fewer tools are engaging the wood material at any given time. Comes equipped with 30 carbide tipped tools as standard equipment. Optional single-edge knife tools available.
Option #2001 - Mulching Head DCR Rotor: Ideal when you need to process material into a fine end product. The depth control rings provide a smaller bite to create a fast cut with less horsepoer draw. The DCR is not recommended for sandy and rocky environments or a job where you may engage the ground; this can cause faster wear. Comes equipped with 24 double-edge knife tools as standard equipment.

Maintain a clean and level look with efficient Grooming Mowers. Designed to give a smooth cut on lawns, sporting fields, and golf courses.

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

Maintain a clean and level look with efficient Grooming Mowers. Designed to give a smooth cut on lawns, sporting fields, and golf courses.

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• 19-hp (14.2-kW)
• 36" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**
  

Maintain a clean and level look with efficient Grooming Mowers. Designed to give a smooth cut on lawns, sporting fields and golf courses.

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Blade up and down is controlled by the vehicle winch.

• 6' Wide x 19.7" Tall Straight Blade
• Five position manual angling and winch lift
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• XUV 845 & XUV 875
• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

Built exclusively for Gator™ vehicles, the WESTERN® IMPACT™ Heavy-Duty snow plows are professional-grade plows built to go anywhere that demands WESTERN-grade performance.

Constructed from high-strength, low alloy steel components, the straight blade features an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance.

IMPACT heavy-duty plows also feature Scrape Lock for clean scraping and back dragging.

• 6' Wide x 23.5" Tall Straight Blade
• Hydraulic Lift & Angle with In-Cab Control
• Quick Attach System with Full Blade Trip Protection
• Includes Plow Markers & Replaceable Cutting Edge Wear Bar
• Additonal harnesses are required. See this worksheet for full-size XUV harness requirements.

Compatible with the following Gator Utility Vehicles:

• XUV625i, XUV825i, & XUV855D (2011 - newer)
• HPX615E & HPX815E (2018 - current)

²⁰

Mulching Heads are built to

• remove up to 8-inch trees and 12-inch stumps.
• shred underbrush and woody materials into beneficial mulch in minutes
• 60-inch high-capacity, smooth rotor design reduces material drag and horsepower requirements.

Option #2000 - Mulching Head Smooth Rotor: Used for ground engagement of 1-2". The smooth drum creates less of a HP draw when mixing wood material into the top layer of the dirt. Spiral design also makes it so that fewer tools are engaging the wood material at any given time. Comes equipped with 30 carbide tipped tools as standard equipment.  Optional single-edge knife tools available.
Option #2001 - Mulching Head DCR Rotor: Ideal when you need to process material into a fine end product. The depth control rings provide a smaller bite to create a fast cut with less horsepoer draw. The DCR is not recommended for sandy and rocky environments or a job where you may engage the ground; this can cause faster wear. Comes equipped with 24 double-edge knife tools as standard equipment.