For 2025R tractors 2017 and newer; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

• 48" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

For 1023E and 1025R tractors built after June 2020; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 96 inches wide.

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1001 - Mounting Adapter Kit, 26 and 30 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1002 - Mounting Adapter Kit, 35 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1012 - Mounting Adaptor Kit, 35 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

Snow Blades are designed for:

• snow removal
• light dirt work
• four different blade positions

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• 22-hp (16.4-kW)^* Cyclonic engine
• 48-in. Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

Snow Blades are designed for:

• snow removal
• light dirt work

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1003 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1008 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

• Designed for durability and flexibility.
• Efficient for mulching capabilities.
• Prominently positioned pressure gauge.

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

Snow Blades are designed for:

• snow removal
• light dirt work

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. 

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1003 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1008 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

Rollout buckets feature:

• an open design that enables quick, clean, and easy material loading.
• three sizes for achieving elevated dump heights in high-capacity applications, including construction, forestry, agriculture, demolition, recycling, and land management.
• standard universal bolt-on cutting edge that is double beveled and reversible, for extended wear life.

• 48" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1004 - Mounting Adapter Kit, 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1005 - Mounting Adapter Kit, 310L/EL Backhoe. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1006 - Mounting Adapter Kit, 310SL/HL, 410L Backhoe. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1007 - Mounting Adapter Kit, 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1010 - Mounting Adapter Kit, 75 and 85 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1011 - Mounting Adapter Kit, 130 and 135 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

Angle Brooms feature:

• standard hydraulic-angling range of 30 degrees to right or left
• 32-inch diameter brush with standard 50/50 poly-wire segments
• optional all-polypropylene brush segments are also available.
  

Compatible with E100, X300, X500, and X700 models. The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include: Compatible with riding lawn tractors and garden tractors; Durable poly construction; All-terrain pneumatic tires; Converts from tow cart to push cart without tools; Large handle is provided for ease of use

• 23-hp (17.2-kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• Excellent for pushing snow or other loose material.
• Blade surface is curved to roll than push material, which requires less power and increases blade capacity.
• Requires two UC13263 suit case weights and one BG20627 rear weight bracket. Tire chains are recommended for additional traction.

Angle Brooms feature:

• standard hydraulic-angling range of 30 degrees to right or left
• 32-inch diameter brush with standard 50/50 poly-wire segments
• optional all-polypropylene brush segments are also available.
  

Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying.

Large 1,000 lb. capacity, 17 cu. ft. load limit. Heavy-duty poly bed won't dent or rust. 16" x 6.50" pneumatic 4 ply turf tread tires for maximum traction. Quick-release dumping action with steep angle for complete emptying.

Bale Spears are

• built for a long working life and designed for the loading, carrying, and stacking.
• designed to provide visibility to the bale spear and tine tips.
• replaceable and come in three different configurations of single, dual, or triple to help match numerous bale-handling applications.

• Tackle stubborn vegetation with powerful performance.
• Make quick work of vegetation with an efficient mulching system.
• Keep working with a durable build and replaceable components.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 72 inches wide.

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

Snow Blades are designed for:

• snow removal
• light dirt work

Angle Brooms feature:

• standard hydraulic-angling range of 30 degrees to right or left
• 32-inch diameter brush with standard 50/50 poly-wire segments
• optional all-polypropylene brush segments are also available.
  

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

John Deere vibratory rollers

• turn a skid steer loader (SSL), compact track loader (CTL), or compact wheel loader (CWL) into a powerful compactor.
• are ideal for asphalt patch, foundation, trench, and flatwork compaction
• are economical since owning one eliminates the costs and maintenance of a self-propelled roller.

• Clear land with a standard flow machine and the SM60.

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit. 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. 

John Deere vibratory rollers

• turn a skid steer loader (SSL), compact track loader (CTL), or compact wheel loader (CWL) into a powerful compactor.
• are ideal for asphalt patch, foundation, trench, and flatwork compaction
• are economical since owning one eliminates the costs and maintenance of a self-propelled roller.

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1001 - MOUNTING KIT, 35, PIN-ON ADAPTER
Option #1002 - MOUNTING KIT, 35, WEDGE ADAPTER

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 84 inches wide.

• Capacity to handle big snow removal jobs.
• Works well in all snow conditions.
• Ideal in all snow regions.
• Rear weights and tire chains are recommended for additional traction.

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

Multi-Purpose Buckets are designed

• with a heavy-duty design for increased durability
• with increased efficiency and capacity

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

John Deere vibratory rollers

• turn a skid steer loader (SSL), compact track loader (CTL), or compact wheel loader (CWL) into a powerful compactor.
• are ideal for asphalt patch, foundation, trench, and flatwork compaction
• are economical since owning one eliminates the costs and maintenance of a self-propelled roller.

Performance advantages of a two-spindle mower in a wide 42-in. (107-cm) size. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system. Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system.

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

• Maximizes attachment capabilities by acting as an interface between the carrier and non-hydraulic add-ons.
• Abrasion-resistant steel plate extends product life.
• Allows attachments to tilt up to 14 degrees.

Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

Option #1006 - 42" TINES RATED 4000 LBS
Option #1008 - 48" TINES RATED 4000 LBS
Option #1007 - 42" TINES RATED 5500 LBS
Option #1009 - 48" TINES RATED 5500 LBS
Option #1010 - 48" TINES RATED 6200 LBS

RS Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• self-clearing cuts
• stump-grinding with optional carbide teeth

Uses the latest in three-spindle mowing technology to raise performance to a higher level. 10-gauge, 0.135-in. (3.4-mm) deck forged steel for long life. Deep, flat-top deck design to handle a large volume of material at faster mowing speeds. Gives excellent cut quality and uniform discharge. Easy to keep clean on top of and under the deck. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system Compatible with high-performance Power Flow⌖ material collection systems.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 84 inches wide.

Bale Spears are

• built for a long working life and designed for the loading, carrying, and stacking.
• designed to provide visibility to the bale spear and tine tips.
• replaceable and come in three different configurations of single, dual, or triple to help match numerous bale-handling applications.

Compatible with E100, X300, X500, and X700 models. Unique bracketless tailgate means no side channels to obstruct materials when emptying. When shoveling, recessed plate bolt heads stay out of the way. 1-Piece solid undercarriage. Contoured corner bed design; 1,000 lb. load limit.

• 23.5-hp (17.5-kW)
• 48”, 54”, and 60” 7Iron™ PRO decks
• Mow up to 10 mph
• Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation^**

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 72 inches wide.

• 25-hp (18.6 kW)^*, 810 cc engine
• 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 21-in. seat with adjustable springs for extra comfort
• Adjustable, 3-position foot platform