• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Heavy-duty paddle beater assemblies
• Poly-bonded floor
• Fine-spread rear pan available

³⁶

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• All steel hopper
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Quick and easy connection

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• Gang Angles Designed for Easy Adjustments
• Rolling Basket for Improved Field Conditions
• Scraper Kit to Remove Soil Buildup
• iMatch™ Quick Hitch Compatible

³⁶

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• Caster wheels follow ground contours and prevent scalping
• Floating hitch for level cutting
• High blade-tip speed
• Rugged gearbox with cooling fins
• iMatch™ and Quick Knect™ compatible from the factory

³⁶

• The string trimmer mount kit was designed specifically to accommodate a string trimmer.
• The brackets mount to the discharge side of the machine.
• Compatible with Z700 Series ZTrak Zero-Turn Mowers.

• 14-bushel collection hopper
• Integrated parking stand is standard 
• Available with optional locking casters
• Boot attaches to compatible mower deck without using tools
• iMatch™ compatible

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Spring-loaded steel trip edge
• Back drag attachment
• Field-installed rubber edge kit

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• XUV560 & XUV590 (2016 - current)

²⁰

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• Driveline protection with slip-clutch or shear bolt
• Ready for tough conditions with 2-in. (5.08-cm) diameter cut capacity
• Easily attached with Quick Hitch and Quik-Knect™ compatibility
• Four available widths: 48, 60, 72, or 84 in. (121.9, 152.4, 182.9, or 213.4 cm)

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• A rear bumper attachment provides additional protection for your ZTrak™ Mower’s rear panel and engine.
• The bumper can be installed with the rear hitch or bagger. The bumper is designed to pivot downward to install the bagger’s hopper by loosening two bolts. The bumper must be returned to its original position if the bagger hopper is removed.

• Polyethylene hopper resists moisture and chemicals
• PTO-driven
• 3 different spread patterns always available
• iMatch^TM compatible

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Adjustable skid shoes
• Scarifier shanks
• Cutting edges are reversable and replaceable
• iMatch™/Quick Hitch Compatible

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Rope System transport latch
• Quick-remove shear hub assembly
• DM5050 & 5060 iMatch and Quick Coupler compatible
• DM5070 Cat. 2 Quick Coupler compatible

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Quick, easy connection
• Rugged, tubular frame
• Replaceable spears for extended implement life

³⁶

• Parking Stand
• Dependable & Rugged Gearbox (6-year Warranty)
• Auger Alignment Handle
• Anti-Burying Auger Plate
  

³⁶

• Fixed position
• Handle brush and turf grass
• Sharp knives reduce material size 
• Leaves finished look

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶

• Replaceable and adjustable ripper shanks
• iMatchTM compatible
• Reversible blade
• Fixed tailgate

³⁶

• Hydraulic side shift
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Working widths from 10' to 30'
• Folding breakaway boom and boomless models
• Electric and PTO pumps options depending on model

³⁶

• Angle adjustment
• Carbide teeth
• Adjustable end plate
• Roll-back barrier provides adjustable pulverizing

³⁶

• Driveline protection with slip-clutch or shear bolt
• Ready for tough conditions with 2-in. (5.08-cm) diameter cut capacity
• Easily attached with Quick Hitch and Quik-Knect™ compatibility
• Four available widths: 48, 60, 72, or 84 in. (121.9, 152.4, 182.9, or 213.4 cm)

³⁶

• Efficient drive system
• Double-sided knives
• iMatch^TMcompatible

³⁶