PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

For 1023E and 1025R tractors built after June 2020; Includes hydraulic cylinder and hoses, AutoConnect PTO shaft, and all AutoConnect mower deck linkages

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

When the snow starts falling, there’s no time to waste. The world keeps moving, and the snow needs to get out of the way. The award-winning PILE DRIVER fixed wing pusher plows with TRACE edge technology move massive amounts of snow—scraping down to the pavement—so you can get more jobs done faster. These pushers raise the bar on efficiency.

Compatible with Skid Steer: 324, 330, 332, 334

Compatible with Compact Track Loaders: 325, 331, 333, 335

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1001 - MOUNTING KIT, 50/60, WEDGE STYLE
Option #1002 - MOUNTING KIT, 50/60, PIN-ON

For 2025R tractors 2017 and newer; Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages

Mulching Heads are built to

• remove up to 8-inch trees and 12-inch stumps.
• shred underbrush and woody materials into beneficial mulch in minutes
• 60-inch high-capacity, smooth rotor design reduces material drag and horsepower requirements.

Option #2000 - Mulching Head Smooth Rotor: Used for ground engagement of 1-2". The smooth drum creates less of a HP draw when mixing wood material into the top layer of the dirt. Spiral design also makes it so that fewer tools are engaging the wood material at any given time. Comes equipped with 30 carbide tipped tools as standard equipment.  Optional single-edge knife tools available.
Option #2001 - Mulching Head DCR Rotor: Ideal when you need to process material into a fine end product. The depth control rings provide a smaller bite to create a fast cut with less horsepoer draw. The DCR is not recommended for sandy and rocky environments or a job where you may engage the ground; this can cause faster wear. Comes equipped with 24 double-edge knife tools as standard equipment.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 72 inches wide.

8'6" PRODIGY Skid-Steer Plow Package

Get all the benefits of a winged plow with the simple control of a straight blade with the WESTERN® PRODIGY™ multi-position wing snowplow. The wings automatically adjust to provide the most efficient plowing configuration for the job. This model adds versatility to your fleet without spending time training operators on how to use new equipment, keeping productivity and profitability high.

Compatible with Skid Steer: 316, 318, 320, 324, 330, 332, 334

Compatible with Compact Track Loaders: 317, 325, 331, 333, 335

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3000 - 14-22 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3001 - 14-22 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3002 - 14-22 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

Snow Blowers Are Designed For:

• throwing snow up to 45 feet away
• snow removal from parking lots, driveways, roadways, or sidewalks

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

RC Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• cutting unkept grass and vegetation

Snow Pushers are designed for:

• efficient snow removal
• parking lots, sidewalks, and driveways
• maneuvering around vehicles, buildings, fences, and other obstacles

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

Rock Buckets are designed

• to retain rock and debris while digging
• with added strength, durability, and dependability with guesseted tines

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 72 inches wide.

John Deere vibratory rollers

• turn a skid steer loader (SSL), compact track loader (CTL), or compact wheel loader (CWL) into a powerful compactor.
• are ideal for asphalt patch, foundation, trench, and flatwork compaction
• are economical since owning one eliminates the costs and maintenance of a self-propelled roller.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 96 inches wide.