Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

Option #1006 - 42" TINES RATED 4000 LBS
Option #1008 - 48" TINES RATED 4000 LBS
Option #1007 - 42" TINES RATED 5500 LBS
Option #1009 - 48" TINES RATED 5500 LBS
Option #1010 - 48" TINES RATED 6200 LBS

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1001 - MOUNTING KIT, 50/60, WEDGE STYLE
Option #1002 - MOUNTING KIT, 50/60, PIN-ON

Mulching Heads are built to

• remove up to 8-inch trees and 12-inch stumps.
• shred underbrush and woody materials into beneficial mulch in minutes
• 60-inch high-capacity, smooth rotor design reduces material drag and horsepower requirements.

Option #2000 - Mulching Head Smooth Rotor: Used for ground engagement of 1-2". The smooth drum creates less of a HP draw when mixing wood material into the top layer of the dirt. Spiral design also makes it so that fewer tools are engaging the wood material at any given time. Comes equipped with 30 carbide tipped tools as standard equipment. Optional single-edge knife tools available.
Option #2001 - Mulching Head DCR Rotor: Ideal when you need to process material into a fine end product. The depth control rings provide a smaller bite to create a fast cut with less horsepoer draw. The DCR is not recommended for sandy and rocky environments or a job where you may engage the ground; this can cause faster wear. Comes equipped with 24 double-edge knife tools as standard equipment.

• 54-in. (137-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• 27-hp (20.1-kW)
• 54” and 60” 7Iron™ PRO decks
• Mow up to 12 mph
• Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation^**

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

For 2032R and 2038R OOS tractors 2017 and newer; Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness, actuator, rotary dial and raise/lower lever. System must be calibrated after installation to insure accurate cut-heights. Refer to installation instructions for calibration procedure or refer to ServiceADVISOR.