• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• 18-in. cut and sewn seat
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

Pallet Forks feature:

• Skid-resistant steps on both sides of the pallet-fork frame ease vehicle entrance and exit.
• Single-piece backrest is available on P45 and P60 options.

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1001 - MOUNTING KIT, 35, PIN-ON ADAPTER
Option #1002 - MOUNTING KIT, 35, WEDGE ADAPTER

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

Rotary Tillers:

• till up to a six-inch depth.
• provide long service life and excellent operation in all conditions.
• require only standard hydraulic flow for high-quality performance.

• 60" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

• 22-hp (16.4-kW)^* Cyclonic engine
• 42-in. (107-cm) Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1003 - MOUNTING KIT, 75/85, PIN-ON
Option #1004 - MOUNTING KIT, 75/85, PIN-ON BHL STYLE COUPLER

• 25.5-hp (19.0 kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
• Electronic throttle control and power two-wheel steer
• Assembled in Wisconsin
• 4 year/500 hour bumper-to-bumper warranty

Base unit includes:

• 60-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 27-hp ^‡ (20.1-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• Gross Power: 48.5 kW (65 hp)
• Net Power: 45.6 kW (61 hp)
• Rated Operating Capacity: 883 kg (1,945 lb.)
• Operating Weight: 2970 kg (6,542 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• 24 hp (17.9 kW)^* iTorque™ Power System
• 54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Twin Touch™ forward and reverse foot pedals
• Assembled in Wisconsin
• 4 year/500 hour bumper-to-bumper warranty

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3030 - 27-35 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3031 - 27-35 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3032 - 36-44 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3033 - 36-44 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• Gross Power: 48.5 kW (65 hp)
• Net Power: 45.6 kW (61 hp)
• Rated Operating Capacity: 795 kg (1,750 lb.)
• Operating Weight: 2806 kg (6,180 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

• 21.5-hp (16.0-kW)^* iTorque™ Power System
• 42-in. (107 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power two-wheel steer
• Assembled in Wisconsin
• 4 year/300 hour bumper-to-bumper warranty

• Standard four-wheel drive (4WD) for maximum traction
• Hydro transmission with Twin Touch™ pedals for ease of use
• Category 1 3-pt hitch compatible with dozens of implements

For pricing and additional discounts, see your local John Deere Dealer.

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit. 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. 

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3000 - 14-22 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3001 - 14-22 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3002 - 14-22 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• 25.5-hp (19 kW) iTorque™ Power System
• Power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
• 4-year/700-hour bumper-to-bumper warranty
• Assembled in Wisconsin
• Available in 48-, 54-, and 60-inch mower deck sizes

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

Bale Spears are

• built for a long working life and designed for the loading, carrying, and stacking.
• designed to provide visibility to the bale spear and tine tips.
• replaceable and come in three different configurations of single, dual, or triple to help match numerous bale-handling applications.

• John Deere has paired proven expertise in compact equipment with Wirtgen Group, the market leader in milling machines and cutting technology, to deliver this new lineup of customer-inspired cold planers.
• Rugged new CP18G, CP24G, and CP30G models can slide horizontally from left to right, for ultra-capable
  control, and are designed for easy pick replacement, to boost uptime.
• Exclusive Tilt-Float/Tilt-Lock feature makes these cold planers ideal for everything from repairing parking lots to cleaning around larger milling machines.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 96 inches wide.

Building on the advanced object detection technology offerings, SmartDetect is available as a field kit for Utility and Production Class P-Tier and X-Tier Loaders. SmartDetect uses a stereo camera system with machine learning to identify objects and people around the machine. It provides audible alerts to the operator and distinct alerts for bystanders to increase situational awareness for the operator on the job site.

• Improves situational awareness through mirror-mounted cameras that provide a wider field of view
• Featured on the in-cab display are projected path lines when in reverse; the in-cab display will also show the operator potential hazards in close proximity
• Alerts operator and bystander through audible alarms

SmartDetect™ requires a 10.1 In (257mm) Secondary Display - G5 (10F0T).

Installation costs not included.

Compatible with Utility Class Loaders: 444 P-Tier, 524 P-Tier, 544 P-Tier, 624 P-Tier, 644 P-Tier, 644 X-Tier and 724 P-Tier (S. N. 18490- ) manufactured after March 2023 with Advanced Vision System and Advanced Object Detection

RS Rotary Cutters are designed for:

• brush clearing
• hardwood clearing
• self-clearing cuts
• stump-grinding with optional carbide teeth

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3003 - 14-22 GPM MOTOR with 48 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3004 - 14-22 GPM MOTOR with 48 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3005 - 14-22 GPM MOTOR with 48 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

GR Series Rock Grapples are designed to be a multipurpose tool for

• land clearing
• brush removal applications
• jobsite clean-up