Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 72 inches wide.

Snow Blades are designed for:

• snow removal
• light dirt work

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 84 inches wide.

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1001 - Mounting Adapter Kit, 26 and 30 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1002 - Mounting Adapter Kit, 35 Size Excavators. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.
Option #1012 - Mounting Adaptor Kit, 35 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses and hydraulic components for installation. Does not include pins.

• Clear land with a standard flow machine and the SM60.

Dozer blades: 

• turn your skid steer loader (SSL) or compact track loader (CTL) into a compact bulldozer.
• deliver maximum uptime to a wide variety of tasks — from stripping clay to finish grading.

Snow Blades are designed for:

• snow removal
• light dirt work

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

Hydraulic Hammers are

• the fastest hydraulic hammers on the market
• designed to provide two to three times more blows per minute (BPM) than previous models

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

• 23.5-hp (17.5-kW)
• 48" deck, 7-gauge fabricated deck
• Mow up to 8 mph
• Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation^**

TR models are designed for

• higher-duty cycles in commercial or heavy-construction applications.
• Heavy-duty planetary-drive design leverages greater hydraulic horsepower from high-flow hydraulics.

Option #3030 - 27-35 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3031 - 27-35 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3032 - 36-44 GPM MOTOR with 60 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3033 - 36-44 GPM MOTOR with 60 IN. X 6 IN. 70/30 COMBO SHARK TOOTH

• 23.5-hp (17.5 kW)^* FX series engine
• 48-, 54-, or 60-in. High-capacity PRO mower deck with welded deck reinforcements
• 24-in. seat with fully adjustable mechanical suspension
• Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 - 5 inches

RR Series Root Rakes are designed to

• finish the job quicker and more economically
• minimize downtime with rugged design
• be compatible with a variety of machines

• Maximizes attachment capabilities by acting as an interface between the carrier and non-hydraulic add-ons.
• Abrasion-resistant steel plate extends product life.
• Allows attachments to tilt up to 14 degrees.

These mulchers are perfect for:

• right-of-way maintenance, fire/fuel reduction, and clearing standing or felled trees and brush along fencerows, roadsides, waterways, and places that could otherwise be difficult to reach.
• Rotor and knife configuration cuts quickly, delivering better fuel economy by processing efficiently with less horsepower.

Option #1000 - LESS MOUNTING BRACKET/HOSES
Option #1001 - MOUNTING KIT, 50/60, WEDGE STYLE
Option #1002 - MOUNTING KIT, 50/60, PIN-ON

Nursery forks are designed to

• easily and effortlessly transport trees as well as large rocks and light boulders.
• firmly grasp root balls, nursery pots, container boxes, or landscape rocks with six-inch tread plate.

Option #1001 - LESS CONTROL VALVE ASSEMBLY
Option #1000 - PRESSURE CONTROL VALVE ASSEMBLY

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1003 - MOUNTING KIT, 50/60, PIN-ON ADAPTER
Option #1004 - MOUNTING KIT, 50/60, WEDGE ADAPTER

• Tackle stubborn vegetation with powerful performance.
• Make quick work of vegetation with an efficient mulching system.
• Keep working with a durable build and replaceable components.

Box blades are:

• 2D or 3D Topcon grade-control ready.
• Push-pull design moves the material for fine grading.
• Two cylinders provide cross-slope operation.
• 84 inches wide.

• 48" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

Planetary Drive Augers are designed for

• increased durability and reliability with improved auger hydraulic motors and components
• increased efficiency and decreased stress with updated auger gearbox and gearbox housing
• reduced maintenance and increased uptime with improved operating features

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

Large 1,000 lb. capacity, 17 cu. ft. load limit. Heavy-duty poly bed won't dent or rust. 16" x 6.50" pneumatic 4 ply turf tread tires for maximum traction. Quick-release dumping action with steep angle for complete emptying.

• 60" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit. 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. 

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1003 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1008 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying.

Multi-Purpose Buckets are designed

• with a heavy-duty design for increased durability
• with increased efficiency and capacity

Compatible with E100, X300, X500, and X700 models. Unique bracketless tailgate means no side channels to obstruct materials when emptying. When shoveling, recessed plate bolt heads stay out of the way. 1-Piece solid undercarriage. Contoured corner bed design; 1,000 lb. load limit.

Snow Blades are designed for:

• snow removal
• light dirt work

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1003 - MOUNTING KIT, 50/60, PIN-ON ADAPTER
Option #1004 - MOUNTING KIT, 50/60, WEDGE ADAPTER

• 7-Iron™ PRO deck
• Mulch On Demand™ Available
• Gasoline Engine
• Propane Option Available
• Rear Discharge Deck

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1003 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1008 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

• 34.5-hp (25.7-kW) EFI engine
• 60-in. and 72-in. 7Iron™ PRO decks, 60-in. FastBack™ PRO deck
• Mow up to 12 mph
• Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation^**

RE-model rotary cutters

• use three swinging blades mounted to a blade carrier to maximize cutting performance
• are able to fell and cut material up to six inches in diameter
• are optimized to work with John Deere compact excavators (CEXs). They’re also compatible with many competitive models

Option #1000 - LESS MOUNTING BRACKET
Option #1001 - MOUNTING KIT, 35, PIN-ON ADAPTER
Option #1002 - MOUNTING KIT, 35, WEDGE ADAPTER

PR Series Power Rakes are designed 

• to finish the job quickly and more economically
• with a heavy-duty design for increased durability
• with hydraulically angled rake for better maneuverability

• 48" TINES ITA CLASS 3B
• PF-Series Severe-Duty Pallet Forks offer improved visibility, increased capacity, and better durability.
• Severe-duty skid steer loader option includes a walk-through backrest with a bolt-on option.
• Increased capacity and durability over the previous fork-frame design.

Option #2004 & #2005 - 9900 lb. rating on forks (per pair of tines)

Pick-Up Brooms feature:

• adjustable baffle, which increases hopper capacity by 22 percent, for greater sweeping impact in each pass
• 26-inch diameter brush with standard 50/50 poly-wire segments
  
• optional all-polypropylene brush segments are also available.
  

• Gross Rated Power: 88.0 kW (118.0 hp)
• Net Peak Power: 85.5 kW (114.7 hp)
• Rated Operating Capacity: 1816 kg (4,000 lb.) with 1 standard counterweight set
• Operating Weight: 4660 kg (10,264 lb.)

For pricing and additional discounts, see your local John Deere Dealer.

These steel tracks enable John Deere skid steer loaders (SSLs) to operate in soft, muddy, loose conditions while also improving traction over hard ground and gravel.

• Designed specifically for trench-, slope-, and excavation-compaction applications.
• Large eccentric weight offset from motor shaft helps provide high-impulse force, resulting in improved compaction rates.
• These plate compactors are optimized to work with John Deere compact excavators (CEXs) and backhoe loaders (BHLs). They’re also compatible with most competitive models. 

Option #1000 - Less mounting bracket and hoses
Option #1003 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1008 - Mounting Adapter Kit, 50 and 60 Size Excavators. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.
Option #1013 - Mounting Adaptor Kit, 50/60 Size Excavators w/ Pin-Grabber Coupler. Includes mounting bracket, hardware, hoses, and hydraulic components for installation.

TC models are ideal for:

• lower-duty cycles in agriculture or light-construction applications.
• Low-profile chain and sprocket drive feature a standard-flow hydraulic motor.

Option #3000 - 14-22 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3001 - 14-22 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3002 - 14-22 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH