For pricing and additional discounts, see your local John Deere Dealer.
Base unit is sold without a loader.
13.6-28 (4PR, R1 Bar, 5 Position) Rear Wheels & Tires; 8-16 (6PR, R1 Bar, 2 Position) Front Wheels & Tires
Base machine comes without iMatch™ Quick Hitch Category 1
Base unit is sold without a Radio
For pricing and additional discounts, see your local John Deere Dealer.
Includes: -5 In. LCD Monitor
Compatible with X700 Series Tractors and Gator Utility Vehicles. Haul a variety of materials. Heavy-duty box construction: 16-gauge, 0.06-in. (1.5-mm) steel; Exposed edges are rolled for strength and safety; Tailgate swings out or can be removed for easier dumping. Large, 10-in. (25.4-cm) wide tires: Provide good flotation and minimal turf compaction; Wheels run on lubricated ball bearings; Bearings are double sealed to keep out contaminants. A 35-degree dump angle makes it easy to unload sand, dirt, etc. Wide wheelbase adds to the stability of the trailer on uneven ground and while turning. Tethered hitch pin: Eliminates the chance of losing the pin; Has the strength to handle pulling heavy loads over rough terrain. 1,000 lb. (454 kg) load limit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator.
For pricing and additional discounts, see your local John Deere Dealer.
Provides 69.5 in. machine width.
For use with canopy.
For pricing and additional discounts, see your local John Deere Dealer.
eHydro™ Transmission (1520) Open Station with Standard Seat (2000) Dual Mid Selective Control Valve (SCV) (3420) Single Rear Selective Control Valve (SCV) (3310)
19.5L-24 (8PR, R4 Industrial, 2 Position) Rear Wheels & Tires; 31.5x13-16.5 (10PR, R4 Industrial, 2 Position) Front Wheels & Tires
Base unit includes:
Adjustable Back Rest and Lumbar Support; Adjustable for Operator Weight; Reduces Shock/Vibration and Increases Comfort; 24" High Back
Pneumatic tires are in the base price for Commercial Z-Trak™ Mowers. Switch to Michelin® X® Tweel® Turf™ for additional cost on units with 48-, 54-, 60- or 72-inch mower decks.
48-in. Shaft-Drive Accel Deep Mower Deck (48A)
TR models are designed for
Option #3006 - 16-19 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3007 - 16-19 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3008 - 16-19 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3009 - 20-24 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3010 - 20-24 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3011 - 20-24 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3012 - 27-35 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3013 - 27-35 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3014 - 27-35 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Option #3015 - 36-44 GPM MOTOR with 36 IN. X 6 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3016 - 36-44 GPM MOTOR with 36 IN. X 8 IN. WIDE STANDARD CUP EVERY CHAIN
Option #3017 - 36-44 GPM MOTOR with 36 IN. X 6 IN. 70/30 COMBO SHARK TOOTH
Compatible with 100, X300, X500, X700 and Residential ZTrak models. Large capacity - 650 lb., 10 cu. ft. Heavy Duty (1/4" thick) poly bed; won't dent or rust. 15" x 6" tubeless pneumatic tires with turf tread for maximum traction. Easy dump release; steep angle for complete emptying.
For pricing and additional discounts, see your local John Deere Dealer.
Provides 69.5 in. machine width.
For use with canopy.
Uses the latest in three-spindle mowing technology to raise performance to a higher level. 10-gauge, 0.135-in. (3.4-mm) deck forged steel for long life. Deep, flat-top deck design to handle a large volume of material at faster mowing speeds. Gives excellent cut quality and uniform discharge. Easy to keep clean on top of and under the deck. Resilient four-point mounting system suspends mower from tractor for a smooth and level cut. Wide mower wheels easily adjusted just above ground level to help prevent scalping. 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height. Onboard deck-leveling system makes keeping mower properly adjusted easy. Compatible with optional MulchControl⌖ mulching system Compatible with high-performance Power Flow⌖ material collection systems.
36
36
For pricing and additional discounts, see your local John Deere Dealer.
eHydro™ Transmission (1520) Open Station with Standard Seat (2000) Dual Mid Selective Control Valve (SCV) (3420) Single Rear Selective Control Valve (SCV) (3310)
19.5L-24 (8PR, R4 Industrial, 2 Position) Rear Wheels & Tires; 31.5x13-16.5 (10PR, R4 Industrial, 2 Position) Front Wheels & Tires
| Subtotal |
$507,132.00†
|
| Sales Tax | - |
| Estimated Total |
$507,132.00†
|
Please enter your ZIP Code to locate dealers near you.
Please wait...With John Deere Rewards, it's easy to become a member, and even easier to start earning rewards. Register for a Free Silver membership or explore Platinum benefits:
Platinum members receive:
• Valuable equipment discounts
• John Deere coupons, including parts discounts
• Explore member benefits
Riding Mowers
View All Riding Mowers
100 Series Lawn Tractors
200 Series Lawn Tractors
Select Series™ X300 Lawn Tractors
Select Series™ X500 Lawn Tractors
X700 Signature Series Tractors
Snow Equipment for Riding Mowers
Riding Mower Attachments & Accessories
Mower Decks for Riding Mowers
Riding Mower Extended Warranty Plans
Zero-Turn Mowers
Gator Utility Vehicles
Compact Tractors
Commercial Mowing Equipment
View All Commercial Mowing Equipment
Commercial Walk-Behind Mowers
QuikTrak™ Q800E Series Stand-On Mowers
QuikTrak™ Q800M Series Stand-On Mowers
QuikTrak™ Q800R Series Stand-On Mowers
Z700 Series Zero-Turn Mowers
ZTrak™ Z900M Series Zero-Turn Mowers
ZTrak™ Z900R Series Zero-Turn Mowers
Commercial Mowing Extended Warranty Plans
Compact Construction Equipment
Tractor Implements & Attachments