• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

• Angling degree range
• Brush diameter is 32 inches for big jobs
• Optional dust suppression system
• Optional gauge wheel kit for setting height

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

Angle Brooms feature:

• standard hydraulic-angling range of 30 degrees to right or left
• 32-inch diameter brush with standard 50/50 poly-wire segments
• optional all-polypropylene brush segments are also available.
  

• 54-in. (137-cm) clearing width
• Two-stage design
• 200-degree hydraulic discharge chute rotation
• 15-in. (381-mm) diameter impeller
• 16-in. (406-mm) diameter auger
• Shear bolt protection
• Adjustable spout cap deflector
• Reversible and replaceable scraper blade
• Four extra shell-mounted shear bolts
• Less front quick-hitch
• Less front PTO
• Less upstop and drive shaft
• Compact tractors require dual selective control valve and front attaching support kit
• BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Quick and easy attachment
• Replaceable tines
• Rugged tubular frame enhances durability

³⁶

• Easy-to-maneuver
• Adjustable cutting height
• Balanced blade pan
• Puncture-resistant rear tires 

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

When it’s time to touch up salt application or get into smaller areas larger hopper spreaders can’t reach, you need a tailgate spreader you can count on. The all-new WESTERN® utility tailgate line does just that. With custom vehicle mounts for your Gator™ model, the LOW-PRO 300 and 300G models spread a variety of bagged de-icing materials up to 25 feet, offering fully featured performance to get more jobs done faster.

• 3.0 Cu. Ft. Poly Single-Stage Tailgate Spreader
• Includes 2" Receiver mount & custom Gator™ mount
• Variable Speed Control, hard wired

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™

²⁰

• Pull-type unit with drawbar
• Adjustable discharge chute
• Reversible, hydraulic feed roll

³⁶

• Power steering
• Cargo box with spray-in liner, brake and taillights
• Maxxis® Bighorn® 2.0 Extreme Terrain Radial Tires, steel wheels
• Up to 4.000-lb  towing capacity

• Adjustable Chute Deflector
• 245° Chute Rotation (Manual or Hydraulic)
• Adjustable and Replaceable Steel Skid Shoes
• iMatch™/Quick Hitch compatible

³⁶

• Corrosion-resistant, powder-coat paint increases durability
• Replaceable shares, shins, and landslides extend life

³⁶

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• Field-installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubbert insert conversion kit keeps discharge from clogging

³⁶

• 4 - 9 ft. (1.2 - 2.8 m) cutting widths
• Single- or dual-belt drive
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• 24-hp (17.9 kW) 3-cylinder diesel engine
• Power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes

• Mow up to 2 Acres per charge²
• 3.2 kWh (3.56 kWh maximum) Sealed Lithium-Ion Battery
• 42-in. (107 cm) or 48-in. (122 cm) Accel Deep™ Mower Deck
• Zero operating emissions and no engine noise
• 5-year/200-hour Battery Warranty³

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Reversible cutting edges
• Heavy-duty frame
• Quick and easy attachment

³⁶

For Model Year 2016- Select Series X300 Tractors. Excellent for pushing light snow or loose material. Install and remove in minutes. Blade angling 25 degrees, with the pull of a pin. No tools needed. Rear weights and tire chains are recommended for additional traction. (Setup Included)

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Efficient drive system
• Double-sided knives
• iMatch^TMcompatible

³⁶

• Manually adjustable angle
• Reversible cutting edge for longer life
• Optional end plates hold extra material
• Optional skid shoes increase cutting edge life
  

³⁶

• High tensile, heavy-gauge steel frame
• Tines float while picking up and removing pallets on uneven terrain
• Tines can be made rigid at any position using set screws

³⁶

• 24 hp^* (17.9 kW) V-Twin engine
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty^**

• Manual angle adjustment
• Reversible cutting edge
• iMatchTM compatible

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Hauls 17 bu. of material.
• Premium features include: adjustable hitch and large 12 in. x 3 in. wheels.
• Collapsible for storage.

• AutoConnect™ deck compatible for deck attach/detach in seconds
• Cab or Open Station configuration available
• Standard hydrostatic transmission with Twin Touch™ pedals

For pricing and additional discounts, see your local John Deere Dealer.

For Select Series mowers with 48-in. Accel Deep mower decks. Hopper design provides modern styling, improved bagging performance, cleaner operation, and easy-to-empty bags. Blower fan and housing provide smooth grass flow even in wet and heavy grass. Price includes BUC11233 7-bu (247-L) 2-Bag Hopper Assembly (X300/X500 M-T), BM21681 Power Flow Chute (6.5/7bu), and BG20748 48A High-Performance Power Flow blower (X300/X500 M-T).

(Setup Included)

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Blade up and down is controlled by the vehicle winch.

• 6' Wide x 19.7" Tall Straight Blade
• Five position manual angling and winch lift
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• XUV835 & XUV865 E,M,R (2017 - current)

²⁰

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Fixed back plate for added rigidity
• Cutting edge is strategically positioned
• Fixed tailgate helps in rough situations
• Scarifier has three depth adjustments

³⁶

• Quick, easy connection
• Rugged, tubular frame
• Replaceable spears for extended implement life

³⁶

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Working width from 25-ft. to 45-ft. (7.62. to 13.72 m)
• 2 tank options – 250- or 300-gallon (946.4 or 1135.6 l)
• Fully-integrated parking stand with built-in pallet fork pockets
• Category 2 and 3 quick coupler compatible

³⁶

• Reversible cutting edges
• Frame is heavy-duty
• Hydraulic angle adjustment
• Quick and easy attachment

³⁶

• Climate-controlled cab with heat and air conditioning
• Smooth, power steering
• Cargo box with spray-in liner, brake and taillights
  
• Up to 4,000-lb  towing capacity

³⁶

• Field installed agitator kit available
• Spreader spout provides precision spreading
• Drive system has anti-wear, cast-steel gearbox
• Rubber insert conversion kit keeps discharge from clogging

³⁶

For Model Year 2016- Select Series Tractors (X580, X584, and X590 with hydraulic lift). Capacity to handle big snow removal jobs. Works well in all snow conditions. Ideal in all snow regions. Rear weights and tire chains are recommended for additional traction. Winter Grill Cover recommended on air-cooled engines to prevent carburetor icing with model year 2006 to 2013 tractors equipped with air-cooled engines. Setup Included.

• Finger joint drive system
• Hydraulic tine pitch control
• Hydraulic fold for easy transport
• Hands-free locking transport wheels

³⁶

• Remove snow while driving forward
• 80-inch clearing capacity
• 245° hydraulic chute rotation
• Hydraulic chute deflector - field installed

³⁶

• Hydraulic side offset
• Handle brush and turf grass
• Sharp knives reduce material size
• Leaves a finished look

³⁶

• Discharge chute deflection
• Field-installed drift cutters kits
• Discharge chute rotation as base equipment
• Torque-controlled impeller moves snow easily

³⁶

• Aerating spoons penetrate tough soils
• Bronze bushings
• iMatch™ hitch system
• Optional sand weight tanks

³⁶

• Reversible cutting edges
• Trip-edge protection
• Optional skid shoes
• Optional hydraulic angle adjustment unit available for AF10 (F)

³⁶

Compatible with Mid Z 9 and 7 Series, Mid Z 994R, and ZTrak Z500 (E, M, R) with ROPS. Not compatible with 997R. Made of tough acrylic coated polyester. The lightweight, durable aluminum frame clamps to roll bar without drilling. Folds easily for removal.

Setup Included.

Stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds. 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance. Optional MulchControl⌖ attachment provides superior mulching performance and versatility. Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance. Mower deck is suspended from the vehicle for a smooth and level cut. Adjustable mower wheels, positioned just above ground level, help reduce scalping. (Setup Included)

• 23.5-hp (17.5-kW)
• 48”, 54”, and 60” 7Iron™ PRO decks
• Mow up to 10 mph
• Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation^**

• 24 hp* (17.9 kW) V-Twin engine
• 48-in (122 cm), 54-in (137cm) and 60-in (152 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit
• 18-in. cut and sewn seat with armrests and easy to read fuel gauge
• 4-year/300-hour bumper-to-bumper warranty**

• Gear driven
• Available in forward or reverse rotating tines
• iMatch^TM and/or quick hitch compatible

³⁶

• Manual angle adjustment
• Reversible cutting edge
• iMatch^TM  compatible
• Manually adjust tilt and offset

³⁶

• Heavy-duty wear shields for added gearcase protection
• Hitch is Quick-Coupler compatible for easy hookup
• Rotor is helical shaped for higher efficiency
• Skid shoes control depth

³⁶

• 11-gauge, 3.03-mm (0.12-in.) reinforced deck
• Single belt drive with an automatic belt idler
• Spindle shafts greased from the top for easy service
• Spacers for quick and easy height adjustment from 2.5 cm (1 in.) to 10.2 cm (4 in.)
• iMatch™ quick-hitch compatible with conversion kit

³⁶

• Heavy-duty paddle beater
• Poly-bonded floor
• Field-installed top beater kits
• Hydraulic conversion kits

³⁶

• Mow up to 2 acres
• 24 HP^* (17.9 kW) V-Twin engine
• Mow up to 7 mph (11.2 km/h) with a 3-gal. (13.6 litre) fuel tank capacity
• 3-year/200-hour bumper-to-bumper warranty^**

• Quick and easy connection

³⁶

• Notched Front & Rear Blades
• Easy Gang Angle Adjustments
• Rear Hitch Included
• iMatch™ Quick Attach Compatible
  

³⁶

• Tubular steel crafted frame
• Reversible cutting edge
• Optional end plates
• Optional skid shoes
  

³⁶

³⁶

• Forged-steel bale spear tines
• Hitch provides a super-quick connection
• Tubular frame is built strong 

³⁶

• Angle adjustment
• Reversible cutting edge
• Optional end plates
• Hydraulic cylinder kit
  

³⁶

• Adjustable tine beam
• Strong steel frame
• Steel tines and waffle plate
• iMatch^TM compatible
  

³⁶

Compatible with 100, 200, X300, X500, and X700 Series. Haul a variety of materials. Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together. Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart. The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.1,000 lb. (454 kg) load limit. (Setup Included)

• Single cylinder for even bale hug
• Hitch capabilities for super-quick connection
• See brochure for loader series compatibility

³⁶

• 24 hp (17.9 kW)^* iTorque™ Power System
• 48-in. Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• 4 year/500 bumper-to-bumper warranty

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Fully hydraulic blade controls allow the operator to make the necessary blade adjustments quickly from inside the cab for fast and efficient winter cleanup.

• 6' Wide x 19.7" Tall Straight Blade
• Hydraulic Lift & Angle with In Cab Control
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• HPX615E & HPX815E (2018 - current)

²⁰

• iMatch^TM compatible
  
• Manually adjustable angle
• Reversible cutting edge
• Optional end plates
  

³⁶

• Reversible cutting edges
• Quick and easy attachment
• Heavy-duty frame
• Optional hydraulic angle adjustment

³⁶

• 5 - 9 ft. (1.5 - 2.8 m) cutting widths
• Single- or dual-belt drive with automatic belt idler
• High blade speed for thorough cutting and uniform distribution
• Cat. 1 iMatch compatible with kit

³⁶

• Built-in seed dispersal rate chart and calibration
• Versatile. Handles multiple seed varieties
• iMatch™ and/or Quick Hitch compatible

³⁶

• Quick and easy connection
• Replaceable, weld-on wear tips

³⁶

Base unit includes:

• 54-In. 7-Iron PRO side-discharge deck; other deck sizes available for additional cost, including Mulch On Demand
• 25.5-hp ^‡ (19-kW) gasoline engine
• Comfort and Convenience controls; Hydraulic Cross-Porting System; Brake-N-Go foot pedal start
• Hydrostatic Drive Train
• Deluxe Comfort Seat with Armrests; other seat options available for additional cost
• 3-year or 1500-hour warranty, whichever comes first; first 24 months, no hour limitation

• Turbocharged diesel engine
• PowrReverser™ or eHydrostatic Transmission options
• Standard 4-wheel-drive
• Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

• Replaceable and adjustable ripper shanks
• iMatch^TM compatible
• Replaceable and reversible blade
• Fixed tailgate

³⁶

• Reversible cutting edge for longer wear life
• Hydraulic cylinder changes blade direction while on the move
• Move hitch pin to allow blade radius to turn 180 degrees

³⁶

• Mechanical side shift
• Hydraulic offset kit available
• Handle brush and turf grass

³⁶

• Widths ranging from 60 to 90-in
• Rotate a full 360 degrees with 5 forward and 5 reverse settings
• iMatch^TM compatible
  

³⁶

The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. The 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Fully hydraulic blade controls allow the operator to make the necessary blade adjustments quickly from inside the cab for fast and efficient winter cleanup.

• 6' Wide x 19.7" Tall Straight Blade
• Hydraulic Lift & Angle with In Cab Control
• Quick Attach System with Full Blade Trip Protection
• Includes: Plow Markers & Replaceable Cutting Edge Wear Bar

Compatible with:

• T-Series: TH Gas, TH Diesel, TX Gator™, TX Turf

²⁰

• 23-hp (17.2-kW)^* iTorque™ Power System
• 48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
• Power four-wheel steer
• 4 year/300 hour bumper-to-bumper warranty

• Compression springs for added force
• Cutting teeth for superior soil preparation
• iMatch™ compatibility
• Steel roller studded with spikes

³⁶

• Quick and Easy Connection
• Heavy-Duty Design to Tackle Tough Jobs
• Stability for Easy Compact Storage
• Hydraulics Mounted for Improved Protection

³⁶

• 7 tines at 1.25 In. diameter solid round steel
• Multiple working widths to match tractor requirements
• Increased uptime with quick-change capability 

³⁶

• Easy to install
• Increases productivity of WH and WHP Series Hydrostatic Walk-Behind Mowers
• Pneumatic tires for a soft ride
• Large operator platform

Setup Included.

• Quick and easy connection

³⁶

• 24-hp (17.9 kW) 3-cylinder diesel engine
• Hydrostatic four-wheel drive, power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals, heavy-duty all-purpose tires
• 4-year/700-hour bumper-to-bumper warranty
• Available in 48-, 54-, and 60-inch mower deck sizes